5. trOubleshOOtinG
5.1.
Bit tip turning blue, grinding process is too aggresive: Cool bit in water and reduce grinding depth.
5.2.
Bit tip requires a large removal of material: Start grinding process on a bench grinder, finish on sharpener.
5.3.
Grinder not turning: Check drill jaws to sharpener coupling.
5.4.
not grinding on full adjustment: Replace worn grinding wheel (20mm spanner), contact your Sealey dealer for spare. See 6.1 for
access to grinding wheel.
6. cleaninG
6.1.
Remove screw on each side of top of sharpener. Remove aperture cap, retain loose parts.
6.2.
Clean sharpener internals with an air line (wear goggles).
6.3.
Clean sharpener externals and adaptor tube with a damp cloth and mild detergent.
dO nOt
use solvents.
SmS2001m | Issue 2 (H,2,3,4,5,6,F) 22/02/18
Original Language Version
© Jack Sealey limited
sealey Group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
enVirOnment prOtectiOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
