warninG! modern vehicles contain extensive electronic systems.
You are required to check with the vehicle Manufacturer, for any specific instructions regarding the use of this type of
equipment on each vehicle. no liability will be accepted for damage / injury, where this product is not used in accordance with
all instructions.
1.3.
personal precautions
9
ensure there is another person within hearing range of your voice and close enough to come to your aid, should a problem arise when
working near a lead-acid battery.
9
Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery.
9
Have fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.
9
Wash immediately with soap and water if battery acid contacts skin or clothing. if acid enters eye, flush eye immediately with cool, clean
running water for at least 15 minutes and seek immediate medical attention.
9
remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit current
which is high enough to weld a ring or the like to metal, which would cause severe burns.
9
ensure hands, clothing (especially belts) are clear of fan blades and other moving or hot parts of engine, remove ties and contain long hair.
8
Do not
smoke or allow a spark or flame in the vicinity of battery or engine.
1.4.
General safety instructions
9
familiarise yourself with the application and limitations of the Jump starter as well as the potential hazards.
9
use the Jump starter in the upright position only and ensure it is placed on a stable surface which will adequately support its weight.
9
Keep tools and other items away from the engine and ensure you can see the battery and working parts of engine clearly.
9
Keep children and unauthorised persons away from the working area.
8
Do not
allow power clamps to touch each other or to make contact with any metallic part of the vehicle.
8
Do not
cross connect power leads from Jump starter to battery. ensure positive (+/red) is to positive and negative (-/BlAcK) is to
negative.
8
Do not
pull the cables or clamps from the battery terminals.
8
Do not
use the charger outdoors, or in damp, or wet locations and
Do not
operate within the vicinity of flammable liquids or gases.
8
Do not
use for a task for which it is not designed.
9
When not in use, store carefully in a safe, dry, childproof location.
9
only use for starting vehicles with 12/24V systems.
Do not
use for other vehicles such as aircraft , ships etc.
8
Do not
use in place of a vehicle battery or as a battery charger.
9
use the jumper cable provided with this unit only.
8
Do not
Jump start more than 3 times in a row. it could damage the unit by overheating. Give two minutes between attempts.
9
remove the product from the vehicle battery within 30 seconds of jump starting. if not, it could lead to damage.
8
Do not
modify or disassemble Jump starter. only a repair technician may repair this unit.
8
Do not
drop unit. If unit receives a sharp blow or is otherwise damaged in any way have it checked by a qualified technician.
8
Do not
use the unit to jump start a vehicle while charging the internal battery.
note: this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. children shall not play with the appliance. cleaning and user
maintenance shall not be made by children without supervision.
2. introDuction
P
owered by lithium-ion technology and fully protected against reverse charging and overload. A dedicated 12/24V jump starter pack that benefits
from being a compact, lightweight unit that also provides high amperage output. capable of starting all 12V vehicles and up to 400-450HP, 24V,
4.5ltr light commercial vehicles. As well as being light Li-ion batteries have numerous advantages over lead acid, including a flat discharge curve.
This ensures a greater and extended performance and holds the charge for up to five times longer with high energy density levels giving more
battery power per gram. includes an integral 3W work light for use at night. fitted with a 32,000mAh @ 3.2V battery and a two usB (5V/1A &
5V/2A) outlets, this unit can also supply up to 10 full charges for smartphones and mp3 players or one full charge for your tablet computer. includes
a 12V port to be used with accessory socket adaptor supplied and three mobile phone or tablet charging cables. the unit can act as a memory
saver during vehicle diagnostics (also requires model no.Vs2073, for details visit www.sealey.co.uk.)
3. specifications
model no ..................................................................... sl32s
starting current: .................................... 12V-600A, 24V-300A
Voltage: ...................................................12V/24V switchable
Auxiliary output: ................... usB (5V/1A & 5V/2A), 12V Port
cable & clamp length: .........565mm cable (clamp - 135mm)
................................................................ usB cable: 227mm
size (W x d x H):.......................................292 x 233 x 79mm
Weight: .......................................................................... 2.7kg
maximum starting capacity: .........12V; All Petrol and diesel,
.................................................................... 24V; 400-450HP
capacity: ..32,[email protected], 800mAh@12V, 400mAh@24V
Peak Amps: ......................................... 12V-1200A, 24V-450A
light output: .....................................................................3W
sl32s | issue 1 27/04/17
Original Language Version
© Jack sealey limited
