4.4.
Carefully stand the unit up, again ensuring that the panels are not twisted, two people are required for this process.
4.5.
Fit the door frame panel into the unit from the inside, locating the frame with the side panels at the top (fig.3) and bottom. Once located
push fit them together until they lock into place.
4.6.
Fit the locker top from the top, ensuring that the three lips locate within the brackets at the back and sides, when they are lined up,
apply pressure and lock the top into place (fig.4).
NOTE:
the shelves and top are identical.
4.7.
Fit the shelves into the locker following the same procedure as for the locker top, beginning at the bottom and working your way up.
4.10
Place hanging bar in position (SL1D and SL2D only) by pushing it into position (fig.4) and fit the mirror by sliding onto the bracket
inside the door.
SL1D.V2 / SL2D.V2 / SL4D.V2 | (H,F,2,3) Issue 3 08/02/2019
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. Please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500
fig.3
fig.4
SL1D.V2
SL2D.V2
SL4D.V2
