3.6.
Fit the shelves into the locker following the same procedure
as for the locker top.
3.7.
Place hanging bar in position (SL1D and SL2D only) by
pushing it into position (fig.4) and fit the mirror in its position
inside the door.
fig.3
SL1D
SL2D
SL4D
fig.4
3.4.
Fit the door frame panel into the unit from the inside, locating
the frame with the side panels at the top (fig.3) and bottom.
Once located push fit them together until they lock into place.
3.5.
Fit the locker top from the top, ensuring that the three lips
locate within the brackets at the back and sides, when they are
lined up, apply pressure and lock the top into place (fig.4).
NOTE:
the shelves and top are identical.
