5.2.
calibration must take place after any repair, overload, impact or other misuse. contact a uKAs accredited laboratory for calibration.
6. MAIntenAnce
6.1.
clean the torque wrench with a soft cloth.
Do not
immerse in any kind of cleaner which may affect the special high pressure
lubrication which the torque wrench is packed with at the factory.
7. conVersIon tAble
sealey Group, Kempson way, suffolk business park, bury st edmunds, suffolk. Ip32 7Ar
01284 757500
01284 703534
www.sealey.co.uk
enVIronMent protectIon
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: no liability is accepted for incorrect use of this product.
warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
s
0455.V2, S0456.V2 | Issue:1 07/06/17
Original Language Version
© Jack sealey limited
