Original Language Version
© Jack Sealey Limited
SHY900S,SHY1200S Issue:1 - 21/09/17
6.1.
The jump starter will perform 5 consecutive operations. Allow the unit to cool for 15 minutes between sessions.
7.1. Changing the Battery
To change the battery: remove the battery compartment cover (fig.2) and disconnect the battery. Replace the battery and secure the
cover.
7.2. Cleaning
Clean with a damp cloth.
DO NOT
use abrasive or solvent cleaners.
6. DUTY CYCLE
7. MAINTENANCE
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack
Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
For battery removal see section 7.1.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
