5.3.
Operating the underbody coating gun
WARNING! Ensure you read, understand and apply the safety instructions in section 1 and follow the manufacturer's instructions
on the underbody coating container.
5.3.1. Screw on a canister of "schutz" underbody coating.
5.3.2. Ensure the air supply is regulated to no more than 6bar (90psi) and then attach the air leader hose to the gun.
5.3.3. To check for correct operation, aim the nozzle of the gun into a safe area first and depress the gun trigger.
fig.1
5.2. Couplings
Vibration may cause failure if a quick change coupling is connected directly to the spray gun. To overcome this, connect a leader hose to
the spray gun. A quick change coupling may then be used to connect the leader hose to the air line recoil hose. See fig.1 & 2.
DO NOT
connect
direct to an air
line recoil hose.
Leader Hose
quick release
fig.2
6. MAINTENANCE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
WARNING! Ensure the gun is disconnected from the air supply before attempting any internal maintenance.
6.1.
After
use, remove the partially used or spent canister and reseal if required.
6.2.
Purge the gun into a safe area and then isolate the mains air before removing the leader hose.
6.3.
Clean all components of the gun thoroughly with paraffin, especially items (1,2,4 and 5) and allow to dry before storage.
Original Language Version
SG139.V2 Issue: 3(L) - 29/10/15
© Jack Sealey Limited
