9
When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof
location.
nOTe:
this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. children shall not play with the appliance. cleaning and user
maintenance shall not be made by children without supervision.
2. InTROduCTIOn
manufactured from durable composite material, ergonomically designed to pivot on a 180° axis, maximising the volume and direction of air flow.
these models can also be wall mounted. featuring 3-speed settings, which can ideally be used for intense cooling power or as an air circulator for
the whole room. Fitted with BS fully approved plug.
3. speCIfICaTIOn
model no: .................................................................... sff12
fan diameter: .......................................................... Ø300mm
speeds: ................................................................................ 3
Power: .............................................................................
45W
supply: ...........................................................................230V
Height: ....................................................................... 400mm
4. OpeRaTIOn
4.1.
The fan can be used either free-standing or wall-mounted (fig.1).
4.2.
Wall mounting
4.2.1.
install 2 x 4mm roundhead screws at 240mm centres in the required position but do not screw home fully.
4.2.2.
locate the keyhole slots in the fan base over the screw heads and slide the base down.
4.2.3.
tighten screws down over base, taking care not to over-tighten.
4.2.4.
The fan head will lock in 10° increments to allow the most effective position to be selected.(fig.1)
4.2.5.
The fan is supplied with a switch providing ‘off’ and 3 speed settings.(fig.2)
4.2.6.
When the fan is being used free-standing, ensure that the switch is in the ‘off’ position before connecting to mains power.
4.2.7.
Ensure that the flex between the mains plug and the fan is routed so as not to present a trip hazard.
5. MaInTenanCe
WaRnInG! ensure that the fan is disconnected from the mains power supply before attempting any of the following:
5.1.
use a soft, damp cloth to clean the fan.
8
dO nOT
immerse the fan in water and never allow water to drip onto the motor housing.
dO nOT
use solvents, petroleum, paint
thinner or other chemicals to clean the fan.
5.2.
to clean the fan blade, undo the four screws on the back and remove the front grille. clean the blade with a slightly damp cloth.
replace the front grille and refit the screws.
5.3.
should the motor, switch or the power lead require service or maintenance contact your local service agent.
5.4.
When not in use pl
ace the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof location.
fig.1
fig.2
s
FF12.V2 | Issue:2 (H,F) 04/12/17
Original Language Version
© Jack sealey limited
sealey Group, kempson Way, suffolk Business park, Bury st edmunds, suffolk. Ip32 7aR
01284 757500
01284 703534
www.sealey.co.uk
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
enVIROnMenT pROTeCTIOn
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee ReGuLaTIOns
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
