background image

6 ltr foam fire extinguisher

Model no: 

sfe06

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  safetY

 

8

   Do not

 use for any purpose other than that which the extinguisher is intended for.

 

9

   Extinguishers should remain in their allocated location, and should be used only for the purposes of extinguishing a fire.

 

9

   on no account should the extinguisher be removed for any other purpose, and should not be subjected to any impact, force, heat,  

  abrasion or any other misuse or condition that may be detrimental to the integrity of the extinguisher.

 

9

   Confirm that the pressure gauge indicator (where applicable) is in the green zone at room temperature. 

 

9

   Confirm that the anti-tamper seal holding the safety pin in place is intact. 

 

9

   Confirm that the discharge hose, horn or nozzles are firmly attached to the extinguisher. 

 

9

   Check that the extinguisher has suffered no physical damage in transit. 

 

9

   It is essential that extinguishers are not subjected to temperatures outside of the temperature range stated on the extinguisher. 

2. 

introDuction

 

SFE06 AFFF (aqueous film-forming foam) extinguisher suitable for use on A, B Class fires. Leak-tested and features polypropylene   

 

lined cylinder with brass valve assembly. Five year warranty. Refillable, supplied with wall mounting bracket and pressure gauge. Fully  

 

accredited to BS EN3 and Kite marked.

3. 

specification

Model no: ................................................................... SFe06

Capacity: ...........................................................................6ltr

Class/Type: .............................................................

AB/Foam

Fire Test Rating: .....................................................

13A/144B

Working Pressure:.........................................................12bar

Height/diameter: .................................................

540/220mm

Weight: ........................................................................ 10.1kg

discharge duration: .....................................................

38sec

discharge Range: ........................................................

3-4mtr

Working Temperature: .........................................+5 to +60°C

4.  installation

4.1.    

Fire extinguishers should be commissioned and installed by a Competent Fire engineer who will check the product prior to installation  

 

and apply a service label. Some Insurance Policies may be invalidated if the service label does not carry a Fire engineers signature. 

4.1.1.   

The names of Fire Engineering companies can be found on-line or in Yellow Pages or similar under such headings as Fire Protection  

 

Engineers and Fire Extinguishing. These Companies will not only install your extinguisher(s) but provide longer term servicing cover. 

4.1.2.   

We would recommend that a Company approved by FETA, BAFE, BSI or the British Fire Consortium be selected.  

4.1.3.   

For further advice on the location of your extinguisher please contact your local Fire Engineer or Fire Brigade.

4.1.4.   

The extinguisher mounting bracket should be fixed to the wall so that the extinguisher handle is approximately 1 metre above the floor. 

4.1.5.   

Extinguishers should remain in their allocated location, and should be used only for the purposes of extinguishing a fire.

4.1.6. 

  

on no account should the extinguisher be removed for any other purpose, and should not be subjected to any impact, force,  

 

 

heat, abrasion or any other misuse or condition that may be detrimental to the integrity of the extinguisher. It is essential that 

 

extinguishers are not subjected to temperatures outside of the temperature range stated on the extinguisher.

4.1.7.   

Fire extinguishers are life saving appliances and as such, need to operate correctly in the event of a fire. 

 

Do not

 use as a toy.

S

FE06    Issue 2 (H, 4, 5, F) 12/11/18

Original Language Version

© Jack Sealey limited

Refer to 

instruction

manual

Reviews: