3. SPECIFICATION
MODEL NO: ...............................................................SD006
Electrical Plug Type: ................................................
3-Pin BS
Frequency: .....................................................................50Hz
Heating Element Voltage: ...........................................
24V AC
Power: .............................................................................60W
4. OPERATION
4.1.
Place the soldering iron in the holder.
4.2.
Then connect the plug to the receptacle on the station and turn clockwise to tighten the plug nut.
4.3.
Connect the control unit to the power supply and switch the power on.
4.4.
A self-test is carried out in which all the display elements are switched on briefly.
4.5.
The electronic system then switches on automatically to the set temperature.
4.6.
The display and temperature setting
4.7.
Press the button “+ UP” or “- DOWN” to adjust the temperature.
4.8.
In short press, the set-point will change ±1°
C
.
4.9.
In long press, the set-point will change quickly and reach your target temperature.
4.10.
“°
C
/ °
F
” is the transfer button between °
C
/ °
F
.
4.11.
The default unit is °
C
, press the “°
C
/ °
F
” button to change between °
C
and °
F
.
5. MAINTENANCE
B
efore further use, safety devices or slightly damaged parts must be carefully checked for error-free and intended operation. Inspect
moving parts for error-free operation and that they don’t bind, or whether any parts are damaged. Damaged safety devices and parts must
be repaired or replaced by a qualified technician, so long as nothing else is indicated in the operation manual. Use only accessories or
attachments which are listed in the operation manual. Use of other tools and other accessories can lead to a danger of injury.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
SD006 Issue 1 28/01/2021
Original Language Version
© Jack Sealey Limited
