background image

S

D004            Issue 1       19/08/2019

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment 
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid 

waste authority for recycling information.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Parts support is available for this product. Please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500

Summary of Contents for SD004

Page 1: ...in plug If in doubt contact a qualified electrician a Connect the GREEN YELLOW earth wire to the earth terminal E b Connect the BROWN live wire to the live terminal L c Connect the BLUE neutral wire to the neutral terminal N Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight Sealey recommend that repairs are carried out by a qualified electrician ...

Page 2: ... to the setting Switch is located on the side of the unit 4 2 2 The current set temperature will be displayed for 3 seconds 4 2 3 After a further 3 seconds the display will show the real time temperature of the tip and charging activity if heating is required NOTE The number of bars shown by the analogue current display fig 1 7 represent the current being applied to the tip 4 3 TEMPERATURE SETTING...

Page 3: ...conds CAL will be displayed 4 5 5 After making any required adjustments press to save the setting 5 ERROR MESSAGES 5 1 If either of the two screens below are displayed turn the unit off and replace the heating element refer to section 7 2 H E indicates heating element failure S E indicates Sensor element failure 6 TEMPERATURE UNITS 6 1 To change the units used in the measurement of temperature hol...

Page 4: ...d fluids according to local regulations WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment WEEE When the product is no longer required it must be disposed of in an environmentally protective way Contact your local solid waste authority for recycling information Note It is our policy to continually...

Reviews: