background image

Original Language Version

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION:

 For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

email

            Environmental Protection

    

   

Recycle unwanted materials instead of disposing of them as  

 

 

   

waste. All tools, accessories and packaging should be sorted,  

 

 

   

taken to a recycle centre and disposed of in a manner which is  

 

 

   

compatible with the environment.

 

   

When the product is no longer required, it must be disposed of in  

 

 

  

an environmentally protective way. Contact your local solid waste  

 

 

   

authority for recycling information.

 

   

 

                    

Battery Removal

 

  

Remove the AAA batteries from the remote control handset by sliding

 

   

open the compartment door and unclipping them. 

 

  

Dispose of batteries according to local authority guidelines

.

 

  

WARNING: Do not dispose of by fire. This could result in an explosion. 

 

  

Under the Waste Batteries and Accumulators Regulations 2009, 

 

   

Jack Sealey Ltd are required to inform potential purchasers of products  

 

   

containing batteries (as defined within these regulations), that they are  

 

   

registered with Valpak’s registered compliance scheme. 

 

   

Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is    

 

  

BPRN00705.  

 

© Jack Sealey Limited

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to:

www.sealey.co.uk, email: [email protected] or phone:01284 757500.

SAC9000.V3     Issue: 4(I) - 11/02/14

Summary of Contents for sac9000.V3








Reviews: