background image

  

WEEE Regulations.

  

Dispose of this product at the end of its working life in compliance   

   

with the EU Directive on Waste Electrical and Electronic Equipment.  

   

When the product is no longer required, it must be disposed of in an  

   

environmentally protective way. Contact your local solid waste  

 

   

authority for recycling information.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

Original Language Version

 © Jack Sealey Limited

 SAC65010B     Issue: 1 - 24/12/14

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business 

Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

W e b

Parts support is available for this product. To obtain a parts listing and/or diagram, 

please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.

 

Environmental Protection.

Recycle unwanted materials instead of disposing of them as  

waste. All tools, accessories and packaging should be sorted,  

taken to a recycle centre and disposed of in a manner which  

is compatible with the environment.

Summary of Contents for SAC65010B







Reviews: