Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
Follow all workshop safety rules, regulations, and conditions when using wrench.
WARNING!
Disconnect from air supply before changing accessories or servicing.
Maintain the
wrench in good condition and replace any damaged or worn parts.
Use
genuine parts only. Un-authorised parts may be dangerous and will invalidate the warranty.
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
Wear approved safety eye/face shield, ear defenders and hand protection.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and non essential persons away from the working area.
DO NOT
use the wrench for a task it is not designed to perform.
WARNING! DO NOT
use wrench if damaged or thought to be faulty. Contact Service Agent.
DO NOT
use wrench unless you have been instructed in its use by a qualified person.
DO NOT
carry the wrench by the air hose, or yank the hose from the air supply.
DO NOT
operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating
medication.
DO NOT
carry wrench with your hand on power trigger, in order to avoid unintentional starting.
DO NOT
direct air from the air hose at yourself or others.
When not in use disconnect from air supply and store in a safe, dry, childproof location.
INSTRUCTION MANUAL:
SUPER STUBBY AIR RATCHET WRENCHES
MODEL No:
SA632 & SA633
2.
INTRODUCTION & SPECIFICATIONS
Ultra-compact air ratchet wrenches fit in the palm of the hand. Perfect for working around
tightly-packed engine compartments. Ratchet yoke designed and manufactured to provide
additional strength. Rear exhaust with baffle to reduce noise.
IMPORTANT WARRANTY INFORMATION
This product is covered by a 1 year parts and labour warranty, except for the ratchet head. This does not
affect your statutory rights.
DO NOT
operate with external leverage, hence exceeding rated torque.
DO NOT
drop the tool after task completion, always place down to prevent ratchet head damage.
MODEL: . . . . . . . . . . . . . . . . . . . .SA632 . . . . . . . . . . . . . . . SA633
Drive Size: . . . . . . . . . . . . . . . . . 1/4”Sq . . . . . . . . . . . . . . . 3/8”Sq
Max Torque: . . . . . . . . . .33.9Nm(25lb.ft) . . . . . . . . 33.9Nm(25lb.ft)
Air Consumption: . . . . . . . . . . . . 2.4cfm . . . . . . . . . . . . . . . 2.4cfm
Operating Pressure: . . . . . . . . . . . . 90psi . . . . . . . . . . . . . . . . 90psi
Air Inlet Size: . . . . . . . . . . . . . . 1/4”BSP . . . . . . . . . . . . . . 1/4”BSP
Noise Power: . . . . . . . . . . . 101.49dB(A) . . . . . . . . . . .101.49dB(A)
Noise Pressure: . . . . . . . . . . 91.33dB(A) . . . . . . . . . . . .91.33dB(A)
Weight: . . . . . . . . . . . . . . . . . . . . . .0.5kg . . . . . . . . . . . . . . . . 0.5kg
Original Language Version
© Jack Sealey Limited 2013
SA632, SA633 Issue: 3 (SP) - 29/08/13
