Slide the cutter housing onto the gear casing and secure using the lock screw. Tighten all
three lock screws.
5.2.
If the system does not have an oiler lubricate the tool daily with a few drops of Sealey air tool
oil dripped into the air inlet.
5.3.
Clean the tool after use.
5.4.
Loss of power or erratic action may be due to the following:
a)
Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size
or type of hose connector. To remedy check the air supply and follow instructions in
chapter 3.
b
) Grit or gum deposits in the tool may also reduce performance. Flush the tool out with
gum solvent oil or an equal mixture of SAE No 10 oil and paraffin.
Allow to dry before use.
5.5.
For a full service contact your local Sealey service agent.
5.6.
When not in use, disconnect from air supply, clean tool and store in a safe, dry,
childproof location.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
W e b
Original Language Version
SA55.V2 Issue: 2(SP) - 12/11/13
© Jack Sealey Limited
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle
centre and disposed of in a manner which is compatible with the environment.
