NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMpOrtAnt:
no liability is accepted for incorrect use of this product.
wArrAnty:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
6. MAintenAnce
wArninG!
disconnect the tool from the air supply before changing accessories, servicing or performing maintenance.
6.1.
replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
6.2.
if the air supply does not have an oiler, lubricate the air tool daily with a few drops of sealey air tool oil dripped into the air inlet to prolong its
life.
6.3.
clean the tool after use.
6.4.
loss of power or erratic action may be due to the following:
a)
excessive drain on the air line. moisture or restriction in the air pipe. incorrect size or type of hose connectors. to remedy check the
air supply and follow instructions in section 4.
b
) Grit or gum deposits in the wrench may also reduce performance. if your model has an air strainer (located in the area of the air
inlet), remove the strainer and clean it. flush the wrench out with gum solvent oil or an equal mixture of sAe no 10 oil and paraffin.
Allow to dry before use.
6.5.
for a full service contact your local sealey service agent.
6.6.
When not in use, disconnect from air supply, clean tool and store in a safe, dry, childproof location.
6.7.
impact wrench only
- check and top up the gearbox oil by removing grub screw located on the right side, above the grip.
sA21/s.V3 | issue 1 04/04/17
Original Language Version
© Jack sealey limited
