instructions for
transportacar trolley
model no:
re901
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9
ensure the trolley is in sound condition and good working order. take action for immediate repair or replacement of damaged parts.
use genuine parts only. the use of improper parts may be dangerous and will invalidate the warranty.
WarnInG!
Prepare the vehicle ready for resting and moving on the trolley. ensure the vehicle will not move, tip, fall etc
once it has been seated on the trolley. take any necessary precautions to protect persons, property and equipment when using this
trolley.
9
locate the trolley in a suitable, well lit working area.
9
Keep working area clean and tidy and free from unrelated materials.
9
use trolley on level and solid ground, preferably concrete. Avoid
tarmacadam as trolley may sink in.
9
ensure the vehicle engine is switched off .
9
ensure there are no passengers in the vehicle.
9
ensure all non-essential persons keep a safe distance whilst the
9
trolley is in use.
9
only place trolley under those lifting points recommended by vehicle
manufacturer
(see vehicle hand book).
9
check the lifting point is stable and correctly held in trolley supports.
9
ensure the trolley wheels are free to move and that there are no
obstructions.
9
ensure you have a clear view and necessary assistance when
transporting vehicle.
9
ensure there are no persons or obstructions beneath the vehicle before moving.
9
When stationary, always lock the two brake wheels.
8
Do not
operate the trolley if damaged.
8
Do not
allow untrained persons to operate the trolley.
8
Do not
exceed the rated capacity of the trolley.
WarnInG! Do not
use the trolley to hold and move a vehicle which is unstable.
8
Do not
allow the vehicle to move on the trolley.
8
Do not
move vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
Do not
work under the vehicle unless supported by axle stands which have been correctly positioned.
8
Do not
ride on the trolley.
8
Do not
use the trolley without appropriate supports.
8
Do not
use the trolley for purposes other than which it is intended.
9
When not in use store trolley in a safe, dry, childproof area.
2. IntroDuctIon
Heavy duty steel frame-work suitable for supporting partly dismantled or badly damaged vehicles. enables easy movement around body shop.
supports interchangeable between v-crutches and sill clamps. supports and clamps adjustable for height and overall width. the trolley is fitted with
2 brake locking wheels.
3. specIfIcatIons
Model no: ................................................................... re901
capacity: .................................................................... 2000kg
min. height: ................................................................ 250mm
max. height: ............................................................... 310mm
min. width: ................................................................ 1035mm
max. width: ............................................................... 1430mm
length: ....................................................................... 600mm
(widths measured between the centre of the trolley points)
re901 | issue 3(i) 10/04/17
Original Language Version
© Jack sealey limited
refer to
instructions
fig.1
Wear safety
footwear