4.4.
slide Bumper support bars (5) on to Vertical support bars (2), clamp in position using Knob (7).
4.5.
side Vertical support bars (2) on to Base bars (4) see diagram. fix/bolt together using bolt set (9). ensure the clamping knobs (7)
are positioned as shown.
4.6.
using bolt set (8) attach Horizontal top bar (1) taking necessary precautions as this is above head height.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imporTaNT:
no liability is accepted for incorrect use of this product.
WarraNTy:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
re55.V6 | issue 1 10/08/16
Original Language Version
© Jack sealey limited
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.