The SM48.V3 is designed to extract dust, saw dust and other fine debris from wood machining. It
should not
be used to extract metallic
debris, glass or water.
2. APPLICATION & SPECIFICATION
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .700cfm
Impeller diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228mm
Intake diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100mm
Flexible hose diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100mm
Flexible hose maximum length . . . . . . . . . . . . . . . . . . . . . . . . . . .2.5m
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V, 50Hz, 746W
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21kg
Noise level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<87dBA
Specification:
Description:
• Collector Body with Motor
• Collector Bag
• Gasket
• Base plate
• Motor Mount
• Screws, nuts, washers (1 bag)
• Castors x 4
• Handle
• Clamp
• Inlet Hose (2.5m)
• Wall Bracket x 2
3. CONTENTS & ASSEMBLY
Note: Numbers in brackets are the item numbers on the parts diagram and in the parts list.
3.1.
Attach the four castors (1) to the underside of the base (4) using screws (2), washers (3) and nuts (2-1). Support base (4) on
battens, or similar, raising castors clear of floor to give stability for the following assembly tasks.
Note:
Collector may be wall mounted using brackets (30) provided, which locate in holes (A) in base. If wall mounting do not fit castors.
3.2.
With screws (13) and washers (12) attach motor mount (20) to base plate (4).
3.3.
With screws (14), washers (12) and nuts (12-1) attach motor (18) to mount (20), so that collector body is positioned as shown in parts diagram.
3.4.
Install outlet (23) to collector body (11) using packing (22), screws (15) and nuts (15-1).
3.5.
Fit collector bag (24) over outlet (23) and secure with clamp (17).
3.6.
Fit handle (25) to side of collector body (11) using screws (28).
Unpack the extractor components and check that all are present and undamaged. In case of shortage or damage please contact the supplier.
4. OPERATING INSTRUCTIONS
!
WARNING!
Before operating the extractor ensure that you read, understand and apply the safety instructions in Section 1.
Note: Numbers in brackets are the item numbers on the parts diagram and in the parts list.
4.1.
Confirm that supply voltage matches the voltage shown on the motor data plate and that the motor switch (16) is ‘Off’.
4.2.
Connect extractor hose (29) to the inlet (6) on the collector body (11) and attach other end to extractor point on equipment.
!
WARNING! DO NOT operate extractor without the hose attached.0
4.3.
Plug into mains supply and press motor switch ‘On’.
4.4.
Ensure that the collector bag is emptied of dust and chips on a regular basis and is not allowed to become full.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed here is
in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a national authority, upon
request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Quality Machinery.
DUST & CHIP EXTRACTOR
Model SM48.V3
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
98/37/EC Machinery Directive
93/68/EEC CE Marking Directive
Signed by Mark Sweetman
13th June 2006
SM48.V3 - 3 - 130606
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
