INSTRUCTIONS FOR:
POWER INVERTER
12V/230V
PURE SINE
WAVE
MODEL No’s:
PSI300, PSI600,
PSI800,PSI1000
IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO
SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
2. INTRODUCTION & SPECIFICATIONS
1. SAFETY INSTRUCTIONS
Original Language Version
PSI300, PSI600, PSI800, PSI1000 Issue:1 - 06/12/12
DANGER! - Beware, lead-acid batteries generate explosive gases during normal battery operation.
Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush immediately with cool
clean running water for at least 15 minutes and seek immediate medical attention.
DO NOT
smoke or allow a spark or flame in the vicinity of the battery or engine.
If the battery terminals are corroded or dirty, clean them before attaching the leads.
WARNING!
To prevent the risk of sparking, short circuit and possible explosion
DO NOT
drop metal tools in the battery area,
or allow them to touch the battery terminals.
Before attaching to battery, remove personal metallic items such as rings, bracelets, necklaces and watches. A lead acid
battery can produce a short-circuit current which is high enough to weld such items to the vehicle and cause severe burns.
Keep children and unauthorised persons away from the working area.
WARNING! DO NOT
use on any vehicles other than those with 12Volt DC systems.
WARNING!
For delicate items such as laptops, an anti-surge device is recommended.
DO NOT
connect to any AC power source.
DO NOT
disassemble. The inverter must be checked by qualified service personnel only.
DO NOT
get inverter wet or use in damp or wet locations or areas where there is condensation.
DO NOT
use the inverter for any purpose other than for which it is designed.
DO NOT
pull the cables or clips from the battery terminals.
DO NOT
operate the inverter if damaged.
DO NOT
connect to a positive earthed system. Ensure you have the polarity correct before connecting, red clip to positive (+)
battery terminal and black clip to negative (-) battery terminal.
Before connecting ensure nothing is plugged into the inverter, and the inverter is switched OFF.
WARNING! Inverters become hot during use.
When not in use store inverter in a safe, dry, childproof location.
Pure sine wave inverter designed to produce the same AV frequency produced on the grid, making it more reliable
than traditional inverters, without any fluctuation in power or performance. Operates from a 12V DC power supply
found in cars, caravans, boats and HGV’s. High performance outlet eliminates electrical interference, reducing noise
levels during use. Suitable for powering small TV’s, laptops, power tools and various other electrical equipment within
the wattage rating of the inverter. Features USB port for use on various domestic equipment such as digital cameras
and mobile phones. Aluminium case provides durability and maximum heat dissipation. Safety features include
automatic overload shutdown and short circuit protection. Supplied with vehicle accessory plug and/or battery
terminal leads depending on model.
MODEL NO:
...............................
PSI300
....................
PSI600
.....................
PSI800
......................
PSI1000
Input Voltage:
............................12V DC ................... 12V DC ....................12V DC .....................12V DC
Output Voltage:
.........................230V AC ................. 230V AC ...................230V AC ...................230V AC
Continuous Output:
..................300W ...................... 600W ........................800W ........................1000W
Maximum Output:
.....................600W ...................... 1200W ......................1600W ......................2000W
No Load Current Draw:
............<0.6A ...................... <0.8A ........................<0.8A ........................<1.0A
Fuse Rating:
..............................40A ......................... 35A x 2 .....................50A x 2 .....................30A x 4
Ambient Temperatue Range:
...0°C/40°C ................ 0°C/40°C .................0°C/40°C .................0°C/40°C
Dimensions (L x Wx H):
...........200 x 110 x 60mm .. 245 x 110 x 60mm ....285 x 140 x 75mm ....315 x 140 x 80mm
Supply Connection:
..................Vehicle accessory ... Battery terminal ........Battery terminal ........Battery terminal
plug & battery leads. leads. leads.
terminal leads.
© Jack Sealey Ltd
Thank you for purchasing a Sealey product. Manufactured
to a high standard thi sproduct will, if used according to these instructions and properly maintained, give you years of trouble free
performance.
