5.4.
V BLOCKS fig 12A and fig 12B
5.5.
SLIDING
RAM ADJUSTMENT fig 13A and fig 13B
5.6.
WORKING TABLE fig 14
6. MAINTENANCE
NOTE:
Maintenance and repair must be carried out by qualified person. Contact your Sealey stockist for details.
6.1.
Check all fittings are tight before each use.
6.2.
Lubricate all moving parts at regular intervals.
6.3.
Always keep the press clean, dry, and protect from harsh conditions.
6.4.
Should you need to replace the oil ensure the piston is fully retracted. An excess of oil will render the press inoperative.
Use only appropriate Sealey hydraulic jack oil.
DO NOT
use brake fluid. Contact your local Sealey stockist for details. Purge the
system to remove any air.
6.5.
Check your model parts information for spares.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE MACHINE.
Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT RETURN PRODUCT TO US.
Please telephone us on 01284 757500 to obtain the address and phone number of your local
agent.
If the product is under guarantee please contact your stockist.
De-commissioning Product
Should the product become completely unserviceable and require disposal, draw off the oil into an approved container and dispose
of the product and the oil according to local regulations.
Original Language Version
© Jack Sealey Limited
fig.12A
fig.12B
fig.13A
fig.13B
fig.14
PPF301S, PPF501S Issue:2 (3)27/06/22
