p
p
WARNING! Ensure you read, understand and apply Section 1 Safety Instructions.
Reminder: DO NOT vacuum hazardous substances. Use of an incorrect cartrige filter will invalidate your warranty.
4.1.
Ensure the machine is unplugged from the power supply.
4.2.
Remove the top section and fit the cartridge filter as shown in
diagram 3.
4.3.
Reposition the head onto the drum body, and clip in place.
4.4.
Insert the larger end of the flexible hose into the front inlet on the
container and lock in place. Push the required attachment onto
the free end of the hose.
4.5.
Plug in the power supply.
4.6.
Switch the motor on (position I).
4.7.
When you have completed vacuuming, press the switch to Off (position
O)
,
and unplug from power supply.
Regularly check the condition of the cartridge filter.
7
DO NOT
use the cartridge filter for wet or sharp materials.
2. CONTENTS AND SPECIFICATION
4. DRY VACUUM CLEANING
3. ASSEMBLY
2.2.1.
Specifications
Motor
230V 1250W.
Container
20ltr.
Filter - Dry
Cartridge Filter
Filter - Wet
Foam.
Item Description
1
Handle.
2
ON/OFF switch.
3
Top section.
4
Filter basket.
5
Safety float valve.
6
Clasp.
7
Container.
8
Vacuum hose connection.
9
Castors.
10
Flexible vacuum hose.
11
Two piece vacuum tube.
12
Blow connection.
13
Large vacuum nozzle.
15
Foamed plastic filter.
16
Crevice nozzle.
17
Cartridge filter (Supplied
as standard)
3.1.
Ensure the mains plug is disconnected.
3.2.
Undo clasps.
3.3.
Lift off the top section assembly.
3.4.
Remove contents from inside the container.
3.5.
Turn the container upside down and insert the casters ensuring
they are pushed all the way in.
3.6a.
For wet vacuum cleaning fit the supplied foamed plastic filter.
3.6b.
For dry vacuum cleaning fit the cartridge filter supplied.
NOTE: Do not operate the cleaner without a cartridge filter fitted as
this will damage the machine and invalidate your warranty.
3.7.
Replace the top section onto the container.
3.8.
Align the top section with the clasps and snap into place, by
applying pressure at the mid point of the clasps.
3.9.
Insert the large end of the hose into the front inlet of the container
and lock in place by turning clockwise a quarter turn.
3.10.
Choose the desired nozzle/extension tube(s) and push it onto the
suction tube.
2.1.
Carton content
2.2
Carefully unpack the carton.
2.3
Locate the two side clasps (fig. 1.6) which hold the top section (fig.1.1)
in place.
2.4.
Undo the clasps, remove the top section and take out the items in the
container.
2.5.
Check and identify each component as listed below. If anything is
missing or damaged please contact your supplier immediately.
fig. 1
PC200.V2 - 1 - 051205
