FOLDING CRANE FOR
VEHICLE ENGINE REMOVAL PURPOSES
MODEL NUMBER: PH20
SERIAL NUMBER:
Test Certificate No:
MODEL NUMBER
DESCRIPTION OF CRANE OR
HOIST AND SERIAL NO (IF ANY).
FOR JIB CRANES,
RADIUS AT WHICH
THE PROOF LOAD
WAS APPLIED
PROOF
LOAD
APPLIED
SAFE WORKING
LOAD (FOR JIB
CRANES AT
RADIUS SHOWN)
MM
920
1100
1280
1460
KG
3000
2250
1500
750
KG
2000
1500
1000
500
This test was commissioned by Jack Sealey Limited, Kempson Way, Suffolk Business Park, Bury St. Edmunds,
Suffolk, 1P32 7AR, and was undertaken by the manufacturer and holder of the construction file. This certificate is
signed by the Chief Engineer for the manufacturer.
We hereby certify that the crane or hoist and accessory gear covered by this test certificate has been tested to 50% overload,
and the safety valve has been set at the rated working capacity. This product was manufactured in China and product
liability insurance is in effect within the U.K. through Axa Insurance Company Policy Number NHCOM 1193182.
E
ngineer Conducting Test:.......................................................................Chief Engineer
Date:...................................
HEALTH AND SAFETY EXECUTIVE
Health & Safety at Work Act 1974. Docks Regulations 1934, regulations 18(a) & 22(a)
SR & O 1934 No 279. Form prescribed by the Secretary of State for
CERTIFICATE OF TEST AND EXAMINATION OF CRANES OR HOISTS AND THEIR
ACCESSORY GEAR, BEFORE BEING TAKEN INTO USE.
PH20 - 0016 - (2) - 240801
