3.1.11 Re-assemble the PC700 by re-inserting filter before hooking the projection on the bottom of the motor
housing into the corresponding notch in the dust collector housing and swivel upwards until it latches audibly.
3.1.12 To clean the rear filter press the release lock on the top of the rear blower cover and remove it. Withdraw the
foam filter and shake it clean, if necessary it may be washed in a little soapy water and dried before replacing.
3.2 Blower.
3.2.1 Remove the standard cover at the rear of PC700 as in section 3.1.12.
3.2.2 Replace with blower cover fig.1N & fig.5.
3.2.3 Attach the desired blower attachments as shown in fig.5.
3.2.4 When you have finished with the blowing function, replace the blower cover with the standard rear cover.
3.3 Shoulder Strap.
3.3.1 The PC700 comes complete with an adjustable shoulder strap.
3.3.2 To fit the shoulder strap simply clip the strap to the mounting points at front and rear of handle (Fig.1B).
Environmental Protection.
Recycle unwanted materials instea d of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
NoTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
PC700 Issue: 2 - 22/10/09
Fig.4
Fig.5
