8
do not
use the cleaner for a task it is not designed to perform.
8
do not
tilt or drop the cleaner.
8
do not
place the cleaner close to a heat source.
9
When not in use, store the cleaner in a safe, dry, childproof location.
2. IntroductIon
High powered, lightweight industrial units. stainless steel drum with dual
filtration system for superior performance. Features safety shut-off for wet
operation. trolleys with swivel bin and two rear locking wheels for easy
emptying plus front swivel castors for added maneuverability. foot operation
for squeegee adjustment. supplied with Ø38mm accessory kit, 3.2mtr cable
with 3 pin plug, cloth and cartridge filters. PC477 is fitted with twin motors
offering superior vacuuming power to collect any type of solid from dust to
rubble and is particularly suitable for industrial and commercial applications
where extra capacity and power are required to clean large areas or large
volumes of waste. Pc455 features blower facility. optional front mounting
squeegee available, as illustrated in fig.9.
3. sPecIfIcatIon
model no.............................................................................Pc477
motor Power........................................................................2400W
supply....................................................................................230V
Air flow............................................................................174m³/hr
drum size...............................................................................77ltr
Weight....................................................................................39kg
Vacuum Accessories Ø........................................................38mm
filter type...................................................................Paper, cloth
replacement Paper filter...............................................Pc477.Pf
replacement cloth filter Basket....................................Pc477.cf
optional squeegee......................................................Pc477aK1
overall squeegee length....................................................670mm
4. assembly
4.1.
Hose Installation. fig. 1.
4.1.1.
fully insert the hose into the suction coupler on the main drum.
it will automatically snap into place.
4.1.2.
to release the hose, slide the release knob in the direction of the
arrow and pull the hose out of the suction coupler.
4.2.
filter removal. fig. 2a/2b
4.2.1.
To access the filter, unclip and remove the upper part of the
4.2.2.
cleaner from the metal tank.
4.2.3.
To change the paper cartridge filter push the retaining clip in the
direction of the arrow (fig.2b) and remove the filter from the motor
unit.
4.2.4.
For wet vacuuming remove the paper cartridge filter and install
the fabric filter over the filter basket. The filter basket (fig.2a) sits
in the top of the drum and is held in place when the upper part of
the vacuum cleaner is clipped onto the tank.
4.3.
locking and unlocking the tank. fig. 4.
4.3.1.
lock the tank to the frame support by pushing the knobs doWn.
4.3.2.
unlock the tank from the frame support by pushing the knobs uP.
4.3.3.
When the tank is unlocked it can be lifted from the frame.
4.3.4.
the tank must only be tipped for emptying in the locked position.
fig.13.
5. oPeratIon
5.1.
nozzles
5.1.1.
The brush nozzle is used on large, dry areas such as a floor
or a bed. fig. 5.
5.1.2.
the squeegee nozzle is used on water, cement or other
non-volatile
substances. fig. 6.
5.1.3. the round brush is used on small areas such as a sofa, window
or the
corner of a floor. Fig. 7.
5.1.4.
the crevice tool is used on narrow grooves or windows. fig. 8.
fig.1
fig.2a
fig.2b
fig.4
fig.5
fig.6
fig.7
fig.8
Pc477,Pc477AK1.V2 | issue 4 05/12/16
Original Language Version
© Jack sealey limited
