background image

30L WET & DRY INDUSTRIAL VACUUM 

CLEANER 1400W STAINLESS DRUM

MODEL NO:

 PC300SD.V3

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

 

1.1.  ELECTRICAL SAFETY

 

‰

  

WARNING!

 It is the user’s responsibility to check the following:

 

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all  

 

electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical  

 

products. You may obtain an RCD by contacting your local Sealey stockist. 

 

If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance  

 

Test) tested.

 

Electrical safety information, it is important that the following information is read and understood.

1.1.1.   

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 

1.1.2.   

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

1.1.3. 

  

Important

: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct  

 

fuse - see fuse rating in these instructions.

 

8

   DO  NOT

 pull or carry the appliance by the power cable.

 

8

  

DO NOT

 pull the plug from the socket by the cable. Remove the plug from the socket by maintaining a firm grip on the plug.

 

8

   DO  NOT

 use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or replaced immediately by a   

  qualified electrician.

1.2. 

  

This product is fitted with a BS1363/A 13 Amp 3 pin plug. 

 

If the cable or plug is damaged during use, switch the electricity supply and remove from use. 

 

Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician.

 

Class II products are wired with live (brown) and neutral (blue) only are marked with the Class II symbol;

 

A) Connect the BROWN live wire to the live terminal ‘L’.

 

B) Connect the BLUE neutral wire to the neutral terminal ‘N’.

 

C) After wiring, check that there are no bare wires and ensure that all wires have been correctly

 

    connected. 

 

Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. 

 

8

   DO  NOT 

connect either wire to the earth terminal. 

 

Sealey recommend that repairs are carried out by a qualified electrician.

1.2.1.   

If an extension reel is used it should be fully unwound before connection. A reel with an RCD fitted is preferred 

 

since any appliance plugged into it will be protected. The cable core section is important and should be at least 1.5mm

²,

 but to be    

 

absolutely sure that the capacity of the reel is suitable for this product and for others which may be used in the other output sockets, we  

 

recommend the use of 2.5mm

²

 section cable.

1.3.    

GENERAL  SAFETY 

 

9

   Disconnect the cleaner from the power supply before servicing, changing accessories, or performing any maintenance.

 

9

   Use only genuine parts and accessories. Unauthorised parts and accessories may be dangerous and will invalidate your warranty.

 

9

  Maintain the cleaner in good condition. Use an authorised agent for servicing. Keep machine clean, but 

DO NOT

 use solvents.

 

9

   For dry vacuuming ensure the cartridge filter is firmly in place before operating the cleaner.

 

8

   DO NOT

 operate the unit without the cartridge filter in place (except when wet vacuuming). 

USING THE CLEANER WITHOUT A    

  CARTRIDGE FILTER WILL CAUSE MACHINE FAULTS AND WILL INVALIDATE YOUR WARRANTY.

 

 

 

9

   Wear protective clothing and gloves. 

 

8

   DO  NOT

 allow children or untrained persons to operate the cleaner. 

 

8

   DO NOT

 place attachments close to your face (especially eyes, ears, etc). 

DO NOT

 point the hose end at other persons or animals.

 

   DANGER! DO NOT

 vacuum hot or glowing ash, cigarette ends, inflammable, explosive, corrosive or other dangerous substances.

 

8

   DO NOT

 operate the unit without the dust bag or optional cartridge filter (except when wet vacuuming). 

 

8

   DO NOT

 leave machine running unattended. Turn power supply OFF, and 

DO NOT

 leave the vicinity until motor has come to a complete  

 stop.

 

8

   DO NOT

 operate the cleaner while under the influence of drugs, alcohol or impairing medication, or if you are tired. 

 

8

   DO NOT

 use the cleaner in the rain or in very damp conditions. 

 

8

   DO NOT

 use the cleaner for a task it is not designed to perform. 

 

9

   When not in use, store the cleaner in a safe, dry, childproof location.

Original Language Version

© Jack Sealey Limited

Read before 

first use

Wear 

protective 

clothing

Wear 

protective 

gloves

Wear 

eye 

protection

Recommended fuse rating

13 Amp

P

C300SD.V3  Issue:4 (F) 19/08/20

Summary of Contents for PC300SD.V3

Page 1: ...e to the live terminal L B Connect the BLUE neutral wire to the neutral terminal N C After wiring check that there are no bare wires and ensure that all wires have been correctly connected Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight 8 DO NOT connect either wire to the earth terminal Sealey recommend that repairs are carried out by a qualifi...

Page 2: ...shaft then insert rear wheel K on the shaft Insert the lock pin R into the hole on the end of the shaft to lock the wheel 5 7 Snap the hub cap O on to the wheel Repeat the same steps at the other end of the shaft fig 2 5b 5 8 For wet vacuum cleaning fit the supplied foam filter fig 2 7 5 9 For dry vacuum cleaning use the cartridge filter supplied fig 2 6 NOTE DO NOT operate the cleaner without a c...

Page 3: ...is turned off fig 5 2 and plug in the power supply fig 5 3 8 3 Switch on the power position I fig 5 4 8 4 The unit will now blow through the hose and can be used to clear obstructions within the pipe fig 5 5 WARNING If after a few seconds the hose is still blocked turn of the unit and clear the hose manually 9 MAINTENANCE 9 1 GENERAL MAINTENANCE 9 1 1 Ensure the machine is unplugged from the power...

Page 4: ... reserve the right to alter data specifications and component parts without prior notice Please note that other versions of this product are available If you require documentation for alternative versions please email or call our technical team on technical sealey co uk or 01284 757505 Important No Liability is accepted for incorrect use of this product Warranty Guarantee is 12 months from purchas...

Reviews: