3. SPecificatiOn
model no: ..........................................................PC195Sd.V2
motor Power ................................................................
1200W
Supply: ...........................................................................230V
maximum Vacuum Pressure: ....................................172mbar
A
irflow:
...................................................................
126mtr³/hr
drum Size: ......................................................................20ltr
drum Type: .................................................... Stainless Steel
W
eight: .......................................................................... 5.3kg
Vacuum Accessories diameter: ................................. Ø32mm
Filter Type: .............................................................. Cartridge
optional Cartridge Filter: ..................................PC195SdCFl
Replacement Foam Filters (Pack of 10) ......... PC195SdFF10
4. aSSembly
WarninG!
make sure vacuum is unplugged before assembly (fig.1.1).
4.1.
OPen Vacuum cleaner
4.1.1.
Undo barrel locks (fig.1.2).
4.1.2.
Raise the top cover assembly from the dust barrel (fig.1.3).
4.1.3.
Remove all of the accessories from the dust barrel (fig.1.4).
4.1.4.
To Install the pedestal on dust barrel, press it down by hand. Check this is mounted correctly (fig.1.5).
4.1.5.
Turn the container upside down and insert the four casters. Check that they are mounted correctly (fig.1.6).
4.1.6.
make sure handle is installed in the correct position of the top cover (ensure the handle is placed correctly on the top cover
before tightening screws) (fig.1.7).
4.1.7.
Place the top cover assembly on the dust barrel and lock it in place with both of the barrel locks (fig.1.8).
4.1.8.
Align the hose assembly port with the suction port, insert and twist it to the right to tighten (fig.1.9).
4.1.9.
The hose can be extended by using the three extension tubes, push together to fit to hose (fig.1.10).
4.1.10. T
o extend the hose use the extension tubes, push the tubes together (fig.1.11).
4.1.11. T
o attach the brush, push onto the tube extension (fig.1.12).
fig.1
Original Language Version
© Jack Sealey limited
PC195Sd.V2
Issue 2 (3) 01/11/18