background image

Vacuum cleaner Wet & Dry 20ltr 1200W 

StainleSS Drum 

model no: 

Pc195SD.V2

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  Safety

1.1.    

electrical Safety

 

‰

  

WarninG!

 It is the user’s responsibility to check the following:

 

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and    

 

all electrical connections for wear and damage. Sealey recommend that an RCd (Residual Current device) is used with all electrical  

 

products. You may obtain an RCd by contacting your local Sealey stockist. 

 

If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable  

 

 

Appliance Test) tested.

 

electrical safety information

, it is important that the following information is read and understood.

1.1.1.   

ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 

1.1.2.   

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

 imPOrtant:

 Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the  

 

correct fuse - see fuse rating in these instructions.

 

8

   DO  nOt

 pull or carry the appliance by the power cable.

 

8

  

DO nOt

 pull the plug from the socket by the cable. Remove the plug from the socket by maintaining a firm grip on the plug.

 

8

   DO  nOt

 use worn or damaged cables, plugs or connectors. ensure that any faulty item is repaired or replaced immediately by a   

  qualified electrician

.

1.1.3. 

  

This product is fitted with a BS1363/A 13 Amp 3 pin plug. 

 

If the cable or plug is damaged during use, switch off the electricity supply and remove from use. 

 

Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician.

 

Class II products are wired with live (brown) and neutral (blue) only are marked with the Class II symbol;

 

A) Connect the BROWN live wire to the live terminal ‘L’.

 

B) Connect the BLUE neutral wire to the neutral terminal ‘N’.

 

C) After wiring, check that there are no bare wires and ensure that all wires have been correctly  

 

 

 

 

 connected. 

 

ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. 

 

8

   DO  nOt 

connect either wire to the earth terminal. 

 

Sealey recommend that repairs are carried out by a qualified electrician. 

1.2.    

General  Safety

 

9

   disconnect the cleaner from the power supply before servicing, changing accessories, or performing any maintenance.

 

9

   Use only genuine parts and accessories. Unauthorised parts and accessories may be dangerous and will invalidate your warranty.

 

9

  

Maintain the cleaner in good condition. Use an authorised agent for servicing. Keep machine clean, but 

DO nOt

 use solvents.

 

9

   For dry vacuuming ensure the dry reusable filter (section 5), is in place before operating the cleaner. 

 

9

   For wet vacuuming ensure the wet filter (section 8), is in place before operating the cleaner. 

 

‰

  

WarninG!

 Using the cleaner without the appropriate filters may cause damage to the vacuum cleaner and will invalidate your warranty.

 

9

 

  Wear protective clothing and gloves.

 

8

  

DO nOt

 place attachments close to your face (especially eyes, ears, etc). 

DO nOt 

point the hose end at other persons or animals.

 

   DanGer! DO nOt

 vacuum hot or glowing ash, cigarette ends, flammable, explosive, corrosive or other dangerous substances.

 

8

  

DO nOt

 leave machine running unattended. Turn power supply oFF, and 

DO nOt 

leave the vicinity until motor has come to a  

 

  complete stop.

 

8

  

DO nOt 

operate the cleaner while under the influence of drugs, alcohol or impairing medication, or if you are tired.

 

8

  

DO nOt

 use the cleaner in the rain or in very damp conditions.

 

8

  

DO nOt

 use the cleaner for a task it is not designed to perform.

 

9

   When not in use, store the cleaner in a safe, dry, childproof location.

nOte:

 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities 

or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and 

understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children 

without supervision.

2.  intrODuctiOn

High powered, lightweight unit with blower facility. Constructed from stainless steel, the drum unit is mounted on four castor wheels. Tool 

storage points on head and base. Supplied with 4mtr cable, 3-pin plug and accessory tool kit, including three rigid extension tubes, wet-use 

foam filter, cloth filter and dust bag.

Recommended fuse rating

13 Amp

PC195Sd.V2

 Issue 2 (3) 01/11/18

Original Language Version

© Jack Sealey limited

Refer to 

instructions

Wear Eye 

Protection

Summary of Contents for PC195SD.V2







Reviews: