Sole U.K. Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
www.sealey.co.uk
PB1000, PB2000, PB3000 - 1 - 081205
5. APPLICATIONS AND SAFE WORKING LOADS
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
IMPORTANT: WHEN USED AS A SIMPLE LIFTING PULLEY (A) THE MAXIMUM LOAD IS LIMITED TO THE SAFE WORKING LOAD (SWL)/ROPE PART.
WHEN USED AS PART OF A TWO-PULLEY SYSTEM (B) THE MAXIMUM LOAD IS LIMITED TO THE BLOCK SWL.
NOTE:
This pulley
cannot
be used as the upper pulley in a two-pulley system.
5.1.
Applications, based on PB1000, are shown below.
NOTE:
Only fully qualified personnel should attempt to carry out maintenance, or repair, on the pulley block.
4.1.
Keep the pulley block clean and regularly lubricate the hook shank.
4.2.
Carry out a visual inspection every time the pulley block is used and listen for any unusual sounds during operation.
p
p
WARNING! The pulley block should be disassembled, cleaned, inspected, reassembled and tested by an Authorised Service Agent annually,
or more frequently if used outside, exposed to the weather.
4.3.
Depending upon the frequency of use and local conditions, the load rope will eventually show signs of wear. When it does, it should be replaced immediately.
4.4.
Overloading, or incorrect hooking, may distort the hook and increase the hook opening. If this occurs replace the hook immediately.
4.5.
Inspect the hook for flaws, cracks, distortion, wear and freedom of rotation.
4.6.
Regularly inspect the pulley wheel for wear.
We, the sole importer into the UK, declare that the products listed here are in conformity with the following standards and directives. The construction files
for these products are held by the Manufacturer and may be inspected, by a national authority, upon request to Jack Sealey Ltd.
PULLEY BLOCK
Models: PB1000, PB2000, PB3000
EN 13157: 2003
98/37/EC Machinery Directive
93/68/EEC Marking Directive
8th December 2005
Declaration of Conformity
Signed by Mark Sweetman
4. MAINTENANCE & INSPECTION
Pulley
Block SWL
SWL/Rope Part
PB1000
1000 kg
500 kg
PB2000
2000 kg
1000 kg
PB3000
3000 kg
1500 kg
