fig.3
6. MAINTENANCE
WARNING!
Before attempting any maintenance ensure the
unit is unplugged from the mains power supply.
6.1.
Keep the machine clean and dry. Clean with a damp cloth;
DO
NOT
use abrasive or solvent cleaners.
6.2.
Clean regularly by blowing a jet of compressed air through side
vents to ensure motor ventilation is kept clear.
WARNING!
Wear approved safety eye protection and, if
necessary, respiratory protection.
NOTE.
The following maintenance must only be carried out by a
technically qualified person or an authorised Sealey service
agent.
6.3.
Check carbon brushes by removing each side brush holder (fig.2).
6.4.
Check to see if the brushes are worn or cracked (fig.3). If so, the
brushes must be replaced to avoid sparking and damage to the
armature. Always change brushes as a pair. Use only genuine
spare parts as these are specifically designed for the machine.
Failure to do so may be dangerous and will invalidate your
warranty.
6.5.
After each 500 hours of use replace the gear head grease to
prevent gear wear and possible drive failure.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
NOTE:
It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into
approved containers and dispose of the product and the fluids according to local regulations.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and
Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling information.
MS925PS Issue: 1 - 29/11/16
Original Language Version
© Jack Sealey Limited
