2. SPECIFICaTIONS
WaRNING!
Wear approved safety eye protection, ear defenders, gauntlets and, if dust is generated, respiratory protection.
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
Keep hands and body clear of the worktable when operating the saw, and DO NOT position your body in line with the abrasive wheel.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and unauthorised persons away from the work area.
Avoid subjecting disc to excessive strain, always ease disc down against workpiece (a harsh downward impact may break the disc). Do not
apply undue force on the handle in order to cut workpiece. Maintain a controlled cutting speed through the workpiece.
WaRNING!
DO NOT switch on the saw whilst the disc is in contact with the workpiece. Bring the rotating disc to the workpiece.
Avoid un-intentional starting of the saw.
DO NOT hold the workpiece by hand. Use base vice to secure the workpiece.
DO NOT use the saw for a task it is not designed to perform.
DO NOT allow untrained persons to operate the saw.
DO NOT get the saw wet, or use in damp or wet locations or areas where there is condensation.
WaRNING!
DO NOT
use the saw where there are flammable liquids, solids or gases such as paint solvents and including waste wiping rags etc.
DO NOT operate the saw if any parts are missing or damaged as this may cause failure and/or personal injury.
DO NOT remove the safety guard whilst the saw is in use.
DO NOT attempt to remove a workpiece until the disc has stopped rotating.
DO NOT touch the workpiece close to the cut as it will be very hot. Allow to cool. The cut edge of the workpiece will also be very sharp.
DO NOT leave the saw operating unattended.
DO NOT operate the saw when you are tired or under the influence of alcohol, drugs or intoxicating medication.
When not in use switch off the saw and remove the plug from the power supply.
To move the saw, lock the machine head with the locking plate and lift by the handle.
General purpose abrasive saw. Supplied with abrasive disc suitable for metal-cutting but will cut concrete with correct blade fitted.
Specifications:
Size of disc. . . . . . . . . . Ø355 x 3 x 25.4mm
Disc Part No. . . . . . . . . . . . . . . . PTC/355C
Cutting capacity @ 90°(bar). . . . . . Ø100mm
Cutting capacity @ 90°(pipe) . . . . . Ø110mm
Cutting capacity @ 45°(bar). . . . . . . Ø40mm
Cutting capacity @ 45°(pipe) . . . . . . Ø50mm
Motor . . . . . . . . . . . . . . . . . . 2200W - 230V
Double Insulated . . . . . . . . . . . . . . . Class II
No-load speed . . . . . . . . . . . . . . . . 3750rpm
Mitre angles . . . . . . . . . . . . . . . . . . . 0 - 45
°
Net Weight . . . . . . . . . . . . . . . . . . . . . 19.8kg
Sound power level . . . . . . . . . . . . . . . 111dB
3. CONTENTS
Unpack the product and check the contents. Ensure that there is no damage. If any problem is noted, contact your supplier immediately.
IMPORTaNT: abrasive disc MUST only be fitted by a qualified person.
Fig.1
Original Language Version
MG314/230V.V3 Issue: 1 - 18/02/10
