INSTRUCTIONS FOR
MINI DISC
AIR SANDER
Model:
MA20.V2
Thank you for purchasing a Sealey Product. Manufactured to a high standard this
product will, if used according to these instructions and properly maintained, give
you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY,
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
Sole UK Distributor,
Sealey Group
,
Bury St. Edmunds, Suffolk.
01284 757500
E-mail:
Web:
www.sealey.co.uk
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data,
specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy our latest catalogue and promotions, call us on 01284 757525 and leave
your full name, address including your postcode.
MA20.V2 - 2 - 160702
p
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to
when using this equipment.
p
WARNING!
Disconnect from air supply before changing accessories, or servicing ,or performing any maintenance.
3
Maintain the sander in good condition (use an authorised service agent).
3
Replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will
invalidate the warranty.
3
Use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.
3
Before use check abrasive pads for condition. If worn or damaged replace immediately.
3
Ensure there are no flammable or combustible materials near the work area.
p
WARNING!
Always wear approved eye (or face) and hand protection when operating the sander.
3
Use face, dust, or respiratory protection in accordance with COSHH regulations.
3
Remove ill fitting clothing. Remove ties, watches, rings, other loose jewellery and contain and/or tie back long hair.
3
Wear appropriate protective clothing and keep hands and body clear of working parts.
3
Maintain correct balance and footing. Do not over reach, ensure the floor is not slippery, wear non-slip shoes.
3
Keep children and unauthorised persons away from the working area.
3
Check moving parts alignment on a regular basis.
3
Ensure workpiece is secure before operating the sander. Never hold a workpiece by hand.
3
Check the workpiece to ensure there are no protruding screws, bolts, nuts etc.
3
Avoid unintentional starting.
p
WARNING!
Ensure correct air pressure is maintained and not exceeded. Recommended pressure 70-90psi
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure
that all connections are secure.
7
DO NOT
use the sander for a task it is not designed to perform.
7
DO NOT
operate sander if any parts are damaged or missing as this may cause failure and/or personal injury.
p
WARNING! DO NOT
sand any materials containing asbestos.
7
DO NOT
carry the sander by the hose, or yank the hose from the air supply.
7
DO NOT
force, or apply heavy pressure to the sander; let the tool do the work.
7
DO NOT
place air line attachments close to your face and do not point at other people or animals.
7
DO NOT
operate sander when you are tired, under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT
use sander where there are flammable liquids, solids or gases such as paint solvents and including
waste wiping or cleaning rags etc.
7
DO NOT
carry the sander with your finger or hand on the power lever.
7
DO NOT
direct air from the air line at yourself or others.
3
When not in use disconnect from air supply and store in a safe, dry, childproof location.
ITEM PART NO
DESCRIPTION
ITEM PART NO
DESCRIPTION
1
122-10.04.15N BODY, MOTOR
23
122-11.04.45
SCREW, CONNECTING ROD
2
122-10.03.20N HANDLE, RUBBER
24
122-21.50.12
PLUG, VIBRATION SUPPORT
3
122-15.01.28
AIR REGULATOR
25
122-29.01.14
NUT
4
122-21.50.10
PLUG, VALVE
26
122-13.02.03
WASHER
5
122-17.01.25
O-RING
27
122-19.50.56
SUPPORT, RUBBER VIBRATION
6
122-25.01.45
SPRING, VALVE
28
122-24.01.26
MOUNT, RUBBER VIBRATION
7
122-21.50.15
STEEL BALL 6.7mm
29
122-13.02.04
WASHER, 6x13x1.5
8
122-15.01.40N STEM, VALVE
30
122-29.01.13
NUT
9
122-31.02.10N BUSH, VALVE
34
122-72.01.31N SILENCER METAL RING
10
122-27.01.48N LEVER
35
122-72.01.30N EXHAUST SILENCER
11
122-23.01.13N PIN, ELASTIC
36
122-32.04.90
BODY, ECCENTRIC
12
122-12.02.20
COVER, MOTOR
37
122-11.05.06
SCREW, SET
13
122-17.01.35
O-RING
38
122-32.03.17
SHAFT, ECCENTRIC BODY
14
B-626ZZ BEARING, 626ZZ
39
B-628-2RS
BEARING, 628 2RS
15
122-16.01.25
FLANGE, UPPER MOTOR
40
122-19.01.10
CIRCLIP
16
122-16.01.29
ROTOR
41
122-32.03.18
JOINT, ECCENTRIC BEARING
17
122-16.01.33
BLADE, ROTOR
42
122-11.05.05
SCREW, SET
18
122-19.50.48
SPACER
43
122-88.08.05
SUPPORT FOR DISC 15 X 60
19
122-16.01.31
SLEEVE, MOTOR
44
122-29.01.16
CUBE
20
122-16.01.27
FLANGE, LOWER MOTOR
45
122-88.08.16
DISC 30MM DIAM
21
122-20.02.56
BALL BEARING
46
122-88.08.11
VELCRO DISC 38MM DIAM
22
122-37.01.50
ROD, DRIVE SUPPORT CONNECTING
PARTS LIST FOR:
MINI DISC AIR SANDER
Model:
MA20.V2
Sole UK Distributor,
Sealey Group
,
Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
Issue: 2
Date: 160702
E-mail:
Web:
www.sealey.co.uk
