![Sealey LED360F Series Instructions Download Page 2](http://html1.mh-extra.com/html/sealey/led360f-series/led360f-series_instructions_1224823002.webp)
3. specification
model no....................................................led360f series
Battery.......................................................7.4V 4.4Ah li-ion
led Quantity.............................................................72smd
Power............................................................................36W
lumen output(High/medium/low).............3000/1500/750lm
operating time (High/medium/low)....................1.5/2.5/5hr
colour temperature...................................................6500K
charging time..............................................................4.5hr
iP rating.......................................................................iP65
The battery fitted to this lamp is considered to be a consumable item
and its ability to accept a charge will reduce over time. We will provide
warranty against mechanical and electrical defect for a period of one
year - this does not cover fair wear and tear. if the battery is not
properly charged before first use, or regularly conditioned, its capacity
will diminish. under these circumstances we will not replace the
battery regardless of whether it is less than one year old.
note:
the lithium battery does not suffer from memory effect and
once fully charged may be stored for up to six months without another
charge.
4. operation
4.1.
remove connection cover located on the rear of the light just below red on/off button. connect charging lead to the socket in the
back of light. connect charger to power supply, switch on power supply. the battery will begin charging, full charge will be reached
in approx. 4.5hrs. the three led lights show the state of charge of the battery when the light is on. switch off remove charger and
replace cover. (A usB port is also position next to the charging connection so that the battery can be used as a powerbank.)
4.2.
direct the lens away from your eyes before switching on.
4.3.
Press on/off button once for low, twice for medium and three times for high lumens output.
4.4.
the lamp can swivel through 360° and be tilted.
Original Language Version
© Jack sealey limited
led360f series | issue 1 25/04/17
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important:
no liability is accepted for incorrect use of this product.
warranty:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
battery removal
remove the 6 hex screws on the back of the lamp. remove the back casing remove the 4 screws holding cir-
cuit board and remove board. remove 4 screws holding battery housing remove battery cells and disconnect
wires. dispose of according to local government guidelines
.
under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak’s
registered compliance scheme. Jack sealey ltd’s Batteries Producer registration number (BPrn) is BPrn00705.
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.