4. opERation
4.1.
chaRging
4.1.1.
The battery fitted to this lamp is considered to be a consumable
item and its ability to accept charge will reduce over time. We will
warranty it against mechanical and electrical defect for a period of
one year, this does not cover fair wear and tear. If the battery
is not properly charged before first use, or regularly
conditioned, its capacity will diminish. Under these circumstances
we will not replace the battery even if it is less than one year old.
note:
The torches will flash when the battery gets low.
4.1.2.
Connect the charger into the charge socket on the lamp, see fig.1.
Plug into power supply and turn on, the red charge LED on the
lamp will light as the battery charges. When fully charged the led
turns green.
4.1.3.
When the battery has fully charged (approx 3hrs) disconnect from
mains supply.
note:
The lithium battery does not suffer from memory effect and once
fully charged may be stored for up to six months without another
charge.
4.2.
Unfold lamp. Select either directional torch or inspection lamp.
Brightness is controlled by dimmer switch.
4.3.
lamp can be hung from the hook or attached using magnets.
4.4.
When the lamps are docked in the station (LED1801K) you can
turn both of the docked torches on by using the on/off button
on top of the unit.
5. MaintEnancE
5.1.
Keep lamp clean and check for damage before every use. If
damage is observed, remove from use until unit is repaired.
5.2.
The battery is not designed to be removed .
Charge Indicator
Lights
Unit On/Off
End Torch
Base magnet and Hook
12 SMD LEDs
0-100% Dimmer
Switch For Main Light
End Torch Switch
Magnets
Micro USB
Charging Port
fig.1
On/Off
Charge Port
fig.2
Sealey group, kempson Way, Suffolk business park, bury St Edmunds, Suffolk. ip32 7aR
01284 757500
01284 703534
www.sealey.co.uk
EnviRonMEnt pRotEction
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REguLationS
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
battERy REMovaL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations).
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [email protected] or telephone 01284 757500
l
ED1801 LED1801K Issue 1 23/07/19
Original Language Version
© Jack Sealey limited
