12 SMD LED + 1W SMD LED REchaRgEabLE
SLiM FoLDing inSpEction LaMp
REchaRgEabLE FLooDLight / inSpEction
LaMp Docking Station kit
Model no:
LED1801 & LED1801k
thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SaFEty
1.1.
gEnERaL
9
It is important to ensure that the lamp is fully charged before initial use.
8
Do not
turn the lamp on when it is being charged.
8
Do not
shine directly into your, another person’s or an animal’s eyes.
8
Do not
allow children to use the lamp.
8
Do not
leave battery in a discharged state. Recharge battery immediately.
9
Recharge the battery at least once every six months of non-use.
9
There are no user serviceable components.
Do not
dismantle.
8
Do not
pull the charger plug from the mains socket by the lead.
1.2.
battERy SaFEty
WaRning!
To reduce the risk of burns or fire:
8
Do not
Attempt to open, disassemble, modify or service the battery pack.
8
Do not
Crush, puncture, short external contacts or dispose of in fire or water.
8
Do not
expose to temperatures above 60°C (140°F).
9
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin, thoroughly wash with water. If it gets in your eyes, rinse thoroughly with cool
water and seek immediate medical attention.
2. intRoDuction
LED1801:
S
limline foldout inspection lamp for use in confined spaces, with 6mm minimum thickness. Inspection arm can be rotated 180° and folded back
for use as a hands-free inspection lamp. Features 12 SMd leds which produce up to 500 lumens, operated by a rolling dimmer switch, and a
1W SMd led in the end for use as a directional torch. Suitable for hands-free operation with three magnets and a hanging hook. Folds away,
small and compact, suitable for keeping in your pocket. Can be charged in a Sealey docking station - LED1801K (not supplied). Powered by a
3.7V 2.6Ah rechargeable li-ion battery which lasts up to eight hours. Supplied with USB charging lead.
LED1801k:
d
ocking station kit includes 2 x LED1801 and charging station. Each inspection lamp has 12 x SMD LED’s (side) + 1 x SMD LED (top)
producing up to 500 lumens. When both inspection lamps are docked it can be used as a floodlight with 2 light options 50% and 100%
producing 500 or 1000 lumens. Each inspection lamp can extend and is able to rotate 180° making it easy to direct the light. 2 x charging
points with individual led charging level indicators. Includes 5V-2A mains adaptor and 1m USB charging cable.
3. SpEciFication
Model no: ...............................................................LED1801 ....................................................LED1801k
Battery: .......................................................3.7V 2.6Ah li-ion .................................... 2 x 3.7V 2.6Ah li-ion
Charging Time: ..................................................................4hr ................................................................ 4hr
I
P Rating:
........................................................................
IP20
..............................................................
IP20
led Qty: .....................................
12 SMD LED + 1 SMD LED
..................
SMD LED (x24) + SMD LED (x2)
lumen output: ...................................Side; 500lm, Top; 70lm ............................. Side; 1000lm, Top; 140lm
Maximum length: ....................................................... 300mm ................................................................n/A
Minimum length: ........................................................ 155mm ................................................................n/A
operating Time: ...........................
Side; 3hr (500lm), Top; 8hr
.........................
Side; 3hr (1000lm), Top; 8hr
l
ED1801 LED1801K Issue 1 23/07/19
Original Language Version
© Jack Sealey limited
Refer to
instructions