5. ASSEMBLY
5.1.
STAND-OFF ASSEMBLY
5.1.1.
Assemble the stand-off as Fig.1. Bolt the ribbed plate onto the main frame
make sure that the ribbed side is facing outwards, secure with bolt,
washer and nuts (Fig.1a).
5.1.2.
Attach the support bar to the main frame using a bolt washer and nut,
choose which side you wish to have the paint hook and include that
between the frame and washer (Fig.1b).
5.2.
ATTACH THE STAND-OFF TO THE LADDER
5.2.1.
The stand-off is secured to the ladder with the two U bolts, washers and
thumb screws (Fig.1c, Fig.2). Ensure that the angled ribbed plate is flush
with the angle of the ladder.
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
fig.2
LAD002 Issue 2 03/11/21
