9
once vehicle is supported, ensure that the vehicle and stands are stable before starting work. ensure that it is not possible for the vehicle
to move before commencing any work.
9
inspect stands before each use.
Do not
use if they show signs of damage.
Do not
use if it is suspected that they have been
overloaded.
9
Before commencing any work or going beneath the vehicle, undertake a risk assessment. ensure that a responsible person is aware of
the work about to be undertaken.
9
replace any labels on the axle stand should they become unreadable. this applies in particular to any warning or operation instruction
labels. if replacement labels are required, contact your sealey stockist.
8
Do not
use axle stands on the highway, or anywhere else if it is deemed to be unsafe.
8
Do not
push or twist the vehicle/load whilst it is supported on stands.
8
Do not
mix components between stands. use only as supplied.
8
Do not
allow children or animals in the vicinity of a vehicle supported on axle stands.
8
Do not
leave a vehicle on axle stands in an area that could be considered a hazard to others or property.
9
folloW StepS 1, 2, anD 3 to coRRectly place vehicle / loaD onto aXle StanDS.
2.
i
intRoDuction
comprises essential equipment required to safely jack up a vehicle. includes a 2tonne trolley jack, a pair of folding wheel chocks, a pair of axle
stands (2tonne combined), 6 wheel padded creeper for comfort whilst carrying out maintenance and an extending l-bar wrench with 17mm & 19mm
socket.
3.
i
Specification
Model no: .................................................................. Jkit01
Jack:
capacity: ................................................. 2 tonnes (2,000 kg)
minimum saddle height: ............................................. 140mm
maximum saddle height: ............................................ 340mm
maximum chassis height: ........................................... 123mm
length: ....................................................................... 450mm
Weight: .......................................................................... 8.7kg
axle stands:
capacity each: .......................................... 1 tonne (1,000 kg)
capacity pair: .......................................... 2 tonnes (2,000 kg)
minimum height: ......................................................... 291mm
maximum height: ........................................................ 391mm
creeper:
frame:............................................................................ steel
size l x W x d: ........................................901 x 425 x 120mm
Wheels: ................................................................................6
JKit01| issue 4 27/09/16
Original Language Version
© Jack sealey limited