PARTS FOR:
HVLP SPRAY GUNS
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used
according to these instructions and properly maintained, give you years of trouble free performance.
INSTRUCTIONS FOR:
HVLP SPRAY GUNS
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Models:
HVLP-750.V2 & HVLP-751.V2
1. SAFETY INSTRUCTIONS
3
Familiarise yourself with the application, limitations and potential hazards peculiar to the spray gun.
p
WARNING!
Disconnect the spray gun from the air supply before changing accessories, servicing or
performing any maintenance.
3
Maintain the spray gun in good condition (use an authorised service agent).
3
Replace or repair damaged parts.
Use recommended parts only. Unauthorised parts may be dangerous
and will invalidate the warranty.
3
Keep the spray gun clean for best and safest performance.
3
Ensure that the compressed air system can supply the spray gun air consumption (550l/min - 19.4cfm).
3
Wear approved safety respiratory protection and safety eye goggles.
3
If spraying isocyanate based finisher, wear approved respirator/clean air breathing apparatus and cover
exposed skin with latex gloves and an impervious hooded coverall.
3
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and tie back long hair.
3
Locate the spray gun in a suitable work area. Keep area clean and tidy and free from unrelated materials
and ensure that there is adequate ventilation and lighting.
3
Keep children and unauthorised persons away from the work area.
3
When not in use, ensure that the air supply is turned off.
3
Avoid unintentional operation of spray gun.
7
DO NOT point spray gun at yourself, other persons or animals.
7
DO NOT direct air from the air hose at yourself, other persons or animals.
7
DO NOT carry the spray gun by the hose, or yank the hose from the air supply.
7
DO NOT exceed the maximum air pressure of 58psi (4 bar).
7
DO NOT use the spray gun for any purpose other than that for which it is designed.
7
DO NOT allow untrained persons to operate the spray gun.
7
DO NOT get the spray gun wet or use in damp or wet locations or in areas where there is condensation.
7
DO NOT operate the spray gun if any parts are missing or damaged as this may cause failure and/or
personal injury.
3
When not in use, disconnect the spray gun from the air supply, clean thoroughly and store safely.
2. DESCRIPTION & SPECIFICATIONS
The HVLP spray gun has an anodised body which resists corrosion and has a low affinity for paint, making
this unit easy to clean. The gun also has adjustable paint and fan width controls. HVLP (High Volume, Low
Pressure) uses lower air pressure but at a far higher throughput. The result of this is that very much more of
the paint stays on the panel and less disappears into the atmosphere.
SPECIFICATIONS
Model HVLP-750.V2 Suction Feed
Standard set-up . . . . . . . . . . . . . . . . . . . . .1.7mm
Available set-ups . . . . . . . . . . . . .1.3, 1.5, 1.9mm
Working pressure range .29 - 37.7psi (2 - 2.6 bar)
Max. safe pressure . . . . . . . . . . . . . .58psi (4 bar)
Air consumption . .14.6 - 19.4cfm (414 - 550l/min)
Model HVLP-751.V2 Gravity Feed
Standard set-up . . . . . . . . . . . . . . . . . . . . .1.5mm
Available set-ups . . . . . . . . . . . . .1.3, 1.7, 1.9mm
Working pressure range .29 - 37.7psi (2 - 2.6 bar)
Max. safe pressure . . . . . . . . . . . . . .58psi (4 bar)
Air consumption . .14.6 - 19.4cfm (414 - 550l/min)
HVLP750.V2 & 751.V2 - 1 - 221001
01284 757500
E-mail:
01284 703534
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No responsibility is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call 01284 757525 and leave your name and address, including postcode.
Item
Part No.
Description
1
142/BH0880186
1.3 Complete Nozzle
1
142/BH0880187
1.5 Complete Nozzle
1
142/BH0880188
1.7 Complete Nozzle
1
142/BH0880189
1.9 Complete Nozzle
2a
142/BH0880190
Complete Body - HVLP-750.V2
2b
142/BH0880191
Complete Body - HVLP-751.V2
3
142/BF088632
Rivet, 6 x 26.5 Zinc Plated
4
142/BL089617
Trigger
5
142/BS088450
Piston Guard
6
142/BS088775
Packing Gland
7
142/BA088773
Spring Gland
8
142/BS088774
Washer Gland
9
142/BC088765
Gasket
Item
Part No.
Description
10
142/BH088494
Upper Complete Regulator
11
142/BH088506
Lower Complete Regulator
12
142/BD088082
O-Ring 2025 PTFE
13
142/BS088084
Piston Gland
14
142/BH088165
Complete Piston
15
142/BA108014
Spring
16
142/BS088085
Washer
17
142/BD088086
O-Ring FC 2025
18
142/BS088118
Sleeve
19
142/BI088114
Needle Ring Nut
20
142/BE088732
1/4 Cup Gasket - HVLP-750.V2
20
142/BC088081
3/8 Cup Gasket - HVLP-751.V2
22
142/BH138010
Service Kit
Models:
HVLP-750.V2 & HVLP-751.V2
Issue No:
1
Date Issued: 221001
