8
do not
use the fan outdoors.
8
do not
modify speed control or attempt to fit any additional external speed control device to the fan.
9
When not in use place the fan in its original box, or otherwise cover, to protect from dust and store in a safe, dry, childproof location.
note:
this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety. children should be supervised to ensure that they do not play with the appliance.
note:
this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. children shall not play with the appliance. cleaning and user maintenance shall not
be made by children without supervision
2. ntroduction
High velocity industrial drum fan suitable for movement of huge volumes of air. robust unit with heavy duty gauge steel casing, guard and frame.
Handle, wheels and tilt function allow the control of airflow to exactly where it is needed. carefully balanced and fully guarded blades provide quiet
and safe operation. fitted with 16A 110V plug. suitable for use in industrial, agricultural, automotive and on site applications.
3. specification
model no: ...............................................................HVd30110V
fan Ø: ..................................................................760mm (30”)
speeds: ...................................................................................2
speed range: ..................................................... 1057-1228rpm
maximum airflow: ......................................................... 285mtr³
Power: ............................................................................. 340W
supply: ............................................................................. 110V
current: ........................................................................... 3.21A
4. operation
Warning!
ensure that you read, understand and apply safety instructions in section 1 before using fan.
4.1.
check that the speed control is set to “0” (off) and then plug into the mains power supply and switch the power on.
4.2.
the fans feature 2 speeds which are selectable using the switch located at the back of the fan, above the motor.
4.3.
Adjust the direction of the air flow by moving from side to side and tilting the fan up or down as required.
4.4.
When you have finished using the fan ensure you turn the speed control switch to “0” (off) and disconnect the fan from the mains power.
5. care of fan
c
Warning! ensure that the fan is disconnected from the mains power supply before attempting any of the following:
5.1.
use a soft, damp cloth to clean the fan.
8
do not
immerse the fan in water and never allow water to drip onto the motor housing.
do not
use solvents, petroleum, paint
thinner or other chemicals to clean the fan.
5.2.
to clean the fan blade, undo the cross headed screws around the circumference, remove the grille and clean the blade with a
slightly damp cloth. replace the grille as required and refit the cross headed screws.
5.3.
should the motor, switch or the power lead require service or maintenance contact your local service agent.
5.4.
if the supply cord is damaged, it must be replaced by a suitably qualified person.
5.5.
When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof location.
noTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important:
no liability is accepted for incorrect use of this product.
Warranty:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
Web
environmental protection
recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
HVd30110V| issue 1 10/11/16
Original Language Version
© Jack sealey limited
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
