background image

Model no.

 .....................................

hvd24.v2

 ...........................

hvd30.v2

 ...............................

hvd36.v2

Fan diameter ..............................610mm (24") ........................760mm (30") ...........................915mm (36")

speeds ......................................................... 2 .......................................... 2 ..............................................2

speed range ..........................1300-1400rpm ..................... 1100-1200rpm ............................ 800-900rpm

maximum Airflow .......220mtr³/min (7,750cfm) .....285mtr³/min (10,020cfm) ........ 297mtr³/min (10,500cfm)

motor Power ...................................190-250W ............................300-355W ...............................350-460W

supply.....................................................230V ....................................230V ....................................... 230V

current..................................................... 1.1A ..................................... 1.5A ........................................ 2.1A

 

  

Warning! ensure that you read, understand and apply safety instructions in section 1 before using fan.

3.1.

 

check that the speed control is set to “0” (off) and then plug into the mains power supply and switch the power on.

3.2.

 

the fans feature 2 speeds which are selectable using the switch located at the back of the fan, above the motor.

3.3.

 

Adjust the direction of the air flow by moving from side to side and tilting  the fan up or down as required.

3.4.

 

When you have finished using the fan ensure you turn the speed control switch to "0” (off) and disconnect the fan from the mains  

 

 power.

 

Warning! ensure that the fan is disconnected from the mains power supply before attempting any of the following:

4.1.

 

use a soft, damp cloth to clean the fan.

 

do not

 immerse the fan in water and never allow water to drip onto the motor housing.

 do not

 use solvents, petroleum, paint  

 

thinner or other chemicals to clean the fan.

4.2.

 

to clean the fan blade, undo the cross headed screws around the circumference, remove the grille and clean the blade with a  

 

slightly damp cloth. replace the grille as required and refit the cross headed screws.

4.3. 

should the motor, switch or the power lead require service or maintenance contact your local service agent.

4.4.

 

When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof   

 location.

 3.  oPeration

  4.  care of fan

  2.  introduction & sPecification

High velocity drum fans suitable for movement of huge volumes of air. robust unit with heavy duty gauge steel casing, guard and frame. 

Handle, wheels and tilt function cradle stand allow the control of air flow to exactly where it is needed. carefully balanced and fully guarded 

blades provide quiet and safe operation. Fitted with Bs fully approved plug. suitable for use in industrial, commercial, agricultural, automotive    

and showroom applications.

hvd30.v2

hvd36.v2

hvd24.v2

 

  

environmental Protection.

  

recycle unwanted materials instead of disposing of them as  

   

waste. All tools, accessories and packaging should be sorted,  

   

taken to a recycle centre and disposed of in a manner which  

   

is compatible with the environment.

  

Weee regulations.

  

dispose of this product at the end of its working life in compliance   

   

with the eu directive on Waste electrical and electronic equipment.  

   

When the product is no longer required, it must be disposed of in an  

   

environmentally protective way. contact your local solid waste  

 

   

authority for recycling information.

HVd24.V2, HVd30.V2 & HVd36.V2     Issue: 3 (l) - 24/03/14

Original Language Version

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

iMPortant: 

no liability is accepted for incorrect use of this product. 

Warranty: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

inforMation:

 For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

sole uK distributor, sealey group, 

Kempson Way, suffolk Business Park

Bury st. edmunds, suffolk,

IP32 7Ar

www.sealey.co.uk

 © Jack sealey limited

Reviews: