Sealey HS102.V3 Quick Start Manual Download Page 4

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: no liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Original Language Version

© Jack Sealey limited

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment 
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid 

waste authority for recycling information.

H

S102.V3 & HS102K.V3   Issue 2  (1)     30/09/19

Summary of Contents for HS102.V3

Page 1: ...hat there are no bare wires and ensure that all wires have been correctly connected Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight DO NOT connect either wire to the earth terminal Sealey recommend that repairs are carried out by a qualified electrician 1 2 1 If an extension reel is used it should be fully unwound before connection A reel with ...

Page 2: ...y equipment and thoroughly clean all areas Ensure paint waste is disposed of in sealed bags or containers 2 i introduction Equipped with triple range variable electronic temperature control Suitable for paint stripping soft soldering removing sticky labels and defrosting frozen pipes Additionally suitable for plastic welding with optional plastic welding nozzles Nozzles supplied separately Gun is ...

Page 3: ...at rear of the gun Experience will determine the setting but we suggest position 6 which gives 330 340 C as a starting position for most commonly used plastics 5 1 10 Select the fan speed setting on the hot air gun according to the size and thickness of material being welded i e Thin Two Thick Three 5 1 11 Now position the nozzle over the material to be welded and feed the welding rod through the ...

Page 4: ...rding to local regulations Note It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice Important No Liability is accepted for incorrect use of this product Warranty Guarantee is 12 months from purchase date proof of which is required for any claim Original Language Version Jack Sealey Limited Weee Regu...

Reviews: