4. MAINTENANCE
5. DECLARATION OF CONFORMITY
3.2.
APPLYING TENSION
p
WARNING! DO NOT overload. Note the pulling capacity in Section 2 Specification.
3.2.1. Engage the drive pawl(s) in the ratchet wheel(s) by pushing pawl spring(HP1000), or drive pawl spring lever (HP1300 & HP1500), in the
direction of arrow B.
3.2.2. Each pull of the handle will wind in the cable and pull the load.
3.3.
RELEASING THE TENSION
p
WARNING! Avoid abrupt handle movements, apply pressure to handle evenly and steadily.
3.3.1. Depress the drive pawl spring (HP1000), or drive pawl spring lever (HP1300 & HP1500), in the direction of arrow A.
3.3.2. Very carefully and slowly push handle in direction E until drive pawl pushes and disengages the stop pawl to clear the ratchet teeth.
Moving the handle back will release the load by one notch.
3.3.3. Repeat this handle motion as required to release the tension one notch at a time.
3.3.4. When the tension has been fully released, check that the load is stable and safe before removing the puller.
4.1.
CLEANING.
Clean the puller after each use and wipe with a slightly oiled cloth. Store in a safe, dry, childproof location.
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
E-mail:
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
HP1000/1300/1500 - 1 - 191201
Declaration of Conformity
We, the sole importer into the UK, declare that the products listed here
are in conformity with the following standards and directives.
The construction files for these products are held by the Manufacturer and may be inspected, by a national
authority, upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
HAND POWER PULLERS
Models
HP1000, HP1300, HP1500
98/37/EC Machinery Directive
21st December 2001
Signed by Mark Sweetman
fig. 1
