NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMportant:
no liability is accepted for incorrect use of this product.
Warranty:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
Battery removal
see section 4.4
under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak’s
registered compliance scheme. Jack sealey ltd’s Batteries Producer registration number (BPrn) is BPrn00705.
4. Maintenance
WarninG! do not
attempt to repair or service your ff400 unless you are qualified to do so. to avoid damage to the ff400 do not get water
inside the case.
4.1.
Periodically wipe the case with a damp cloth and mild detergent. do not use solvents.
4.2.
turn the sender and receiver off when not in use and remove the batteries if stored for a long period of time.
4.3.
do not store in a place of high humidity or high temperature.
4.4.
to replace the batteries on either the sender or the receiver, simply undo the Philip’s screw on the rear of the unit battery cover and
replace the battery with a 9V PP3.
fig.4
ff400 | issue 2 10/04/17
Original Language Version
© Jack sealey limited
