INSTRUCTIONS FOR MODEL:
ES200
UNDER VEHICLE ENGINE SUPPORT
+ ADAPTORS
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
ES200, ES200-01 to 29 - 3 - 220207
1. SAFETY INSTRUCTIONS
The ES200 together with its associated adaptors supports or raises the engine from underneath during maintenance operations without the use
of a trolley jack or conventional over-engine support beam. It allows unimpeded access to the engine from above and also permits safe
movement of the vehicle whilst the engine is raised. Vehicle specific adaptor sleeves mount onto the vehicle structure and the base unit is then
attached to the sleeve. The engine is raised by a screw adjusted pad. The unit is ideal for rapid and safe cambelt changes, engine mount
replacement, transmission removal, etc. The adaptor sleeves shown below are not supplied with the base unit and must be ordered separately.
2. INTRODUCTION & APPLICATIONS
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
ES200
BASE UNIT with locking pin
and two-part end clamp.
(Adaptors must be ordered
separately from the base unit.)
ES200-01
ES200-02
ES200-03
ES200-04
ES200-05
FORD GALAXY, SEAT ALHAMBRA,
VW SHARAN
CITROEN BERLINGO,
PEUGEOT 406, PARTNER
FORD FOCUS
AUDI A3, SEAT LEON, SKODA OCTAVIA,
VW GOLF 4, BEETLE
PEUGEOT 206, 307
FORD FUSION, FIESTA
FORD C-MAX
!
WARNING! Before use, ensure that the vehicle handbrake is on and that you have safe access to the underside of the vehicle.
!
WARNING! Before use, ensure that the cross member on the underside of the vehicle to which you will mount the engine support
is structurally sound and undamaged. Do not proceed if you are doubtful about the condition of the mounting area.
"
Maintain the engine support in good condition (use an authorised service agent).
"
Replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
"
Ensure that there is adequate lighting.
#
DO NOT
attempt to modify another adaptor to fit.
#
DO NOT
use the engine support if damaged.
#
DO NOT
make any modifications to the engine support.
#
DO NOT
operate the engine support when you are tired or
under the influence of alcohol, drugs or intoxicating medication.
#
DO NOT
use the engine support for a task it is not designed to perform.
#
DO NOT
allow untrained persons to operate the engine support.
#
DO NOT
attempt to use an adaptor that does not fit properly.
"
Ensure that the floor beneath is not slippery and wear non-slip shoes.
"
Keep children and unauthorised persons away from the work area.
ES200-06
ES200-07
AUDI A3, SEAT ALTEA, TOLEDO,
SKODA OCTAVIA 2004, VW GOLF 5
VW LUPO
ES200-08
ES200-10
