CPS02 Issue: 1 - 19/12/14
Original Language Version
© Jack Sealey Limited
4.2.
Assemble Roof Frame
4.2.1.
Using fig.2 as
a guide assemble the roof frame.
4.2.2. Fit the eight roof strainers and tension them.
fig.1
fig.2
fig.3
Page 1: ...e kerosene propane etc in the shelter operate gas powered equipment in or around the shelter 3 Keep open flames a safe distance away from the shelter 7 DO NOT use hard edged tools or instruments such as rakes or shovels to remove snow These can cause punctures to the cover 7 NEVER start the engine of any vehicle or machine inside a closed shelter Ensure that there is adequate ventilation for start...
Page 2: ...ssue 1 19 12 14 Original Language Version Jack Sealey Limited 4 2 Assemble Roof Frame 4 2 1 Using fig 2 as a guide assemble the roof frame 4 2 2 Fit the eight roof strainers and tension them fig 1 fig 2 fig 3 ...
Page 3: ...ne side then repeat for the other 4 4 3 Pass the cross braces through the sleeves then refer to figs 4 and 5 for the assembly of the middle leg brackets and figs 6 and 7 and for the assembly of the end leg brackets 4 5 Fix Cover and Fit Ends 4 5 1 Fix the cover to the frame by closing the velcro strips round the poles Then fit the toggles through the eyelets and round the frame see fig 8 4 5 2 Use...
Page 4: ...ion Recycle unwanted materials instead of disposing of them as waste All tools accessories and packaging should be sorted taken to a recycling centre and disposed of in a manner which is compatible with the environment When the product becomes completely unserviceable and requires disposal drain off any fluids if applicable into approved containers and dispose of the product and the fluids accordi...
