Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
Rechargeable battery contains nickel cadmium (NiCad). It is recyclable. Take to your local recycling centre to be
disposed of properly. Do not incinerate NiCad battery as it may explode when exposed to fire.
Do not attempt to open battery pack.
4. MAINTENANCE
4.1 CLEANING
Keep the outer case of the wrench clean and free from grease. DO NOT wash with water or use solvents or abrasives. Use a slightly
dampened cloth. For any other service or maintenance, contact your authorised service agent.
4.2 LUBRICATION
If the wrench has not been used for some time, remove the lubrication screw (fig.1.2) and inject grease into the impact mechanism.
WARNING! Ensure you read, understand and apply safety instructions before use.
3.2 USING THE WRENCH
3.2.1 Use only impact sockets which are specifically designed for use with an impact wrench. The use of normal chrome vanadium sockets
is dangerous since these are more brittle and are liable to shatter.
3.2.2 Fit the socket to the wrench by snapping it onto the square drive (fig 1.1).
3.2.3 Fit the battery pack to the wrench by aligning the tongue on the battery with the groove in the housing and slide into place. Ensure
that the battery pack is firmly located, you will hear an audible click when it has locked into position.
3.2.4 Select the required direction of rotation. To change direction, push switch (fig.1.3) to the left or right. Familiarise yourself with this
operation before use. DO NOT attempt to change the direction of rotation whilst trigger (fig.1.6) is depressed.
When the wrench is not in use, use the same switch to lock off the trigger by placing the switch in the middle position.
3.2.5 When tightening, release the trigger as soon as the impact sound is heard. Take care not to over-torque small fixings.
Note: On critical fixings always check the torque with a torque wrench according to the product or vehicle manufacturer’s
guidelines.
Risk of Hand Arm Vibration Injury.
Cordless Impact Wrench: CP1920
when operated in accordance with these instructions and tested in accordance with EN 28662-1: 1993
results in the following vibration emission declared in accordance with
BS EN12096: 1996.
Measured vibration emission value: . . . .
1.67m/s²
Uncertainty:. . . . . . . . . . . . . . . . .
0.67m/s²
These values are suitable for comparison with emission levels of other tools that have been subject to the same test.
This tool may cause hand-arm vibration syndrome if its use is inadequately managed.
Recommended Measures to reduce risk of hand-arm vibration syndrome:
This item represents a low Hand Arm Vibration risk to users. The calculated maximum usage period exceeds
8
hours. We recommend
appropriate safety equipment is utilised and regular breaks for the operator are employed to reduce any residual risk of fatigue or repetitive
strain injury.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
CP1920 Issue: 3 - 04/01/12
