background image

10.8V SV10.8 SERIES  Ø150MM DUAL ACTION 
SANDER/POLISHER - BODY ONLY 

MODEL NO: 

CP108VSPBO

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 
instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

 

9

  

Maintain the tool and battery in good condition. Check moving parts alignment on a regular basis. 

 

9

  

Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be  

 

 

dangerous and will invalidate the warranty.

 

9

  

Ensure the tool is switched off before installing the battery pack.

 

9

  

Keep the tool and charger clean for best and safest performance.

 

9

  

Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.

 

9

  

Evaluate your working area before using the tool; e.g. ceilings, floors and enclosures may contain electrical items or water piping.

 

9

   Ensure battery pack is correctly inserted into the handle and latched in place before attempting to switch on tool.

 

9

  

Secure loose work pieces with a clamp, vice or other adequate holding device. 

 

9

 

Avoid unintentional starting.

 

9

  Wear approved safety eye protection (standard spectacles are not adequate).

 

9

  Maintain correct balance and footing. Ensure the floor is not slippery and wear non-skid shoes.

 

9

  Keep children and unauthorised persons away from the working area.

 

9

  Perform formal risk assessment before use.

 

8

  

DO NOT

 use the tool where there are flammable liquids, solids or gases, such as paint solvents, etc.

 

8

  

DO NOT

 allow children to operate the tool.

 

8

 

DO NOT

 operate the tool

 if any parts are missing as this may cause failure and/or personal injury.

 

8

 

DO NOT

 hold unsecured work piece in your hand.

 

8

 

DO NOT

 leave the tool operating unattended.

 

8

 

DO NOT

 carry the tool

 with your finger on the power switch. Keep chuck direction switch in the locked position.

 

8

 

DO NOT

 use the tool

 for a task it is not designed to perform.

 

8

 

DO NOT

 use accessories which are not designed or recommended for this tool

 

8

 

DO NOT

 use excessively oversized disc paper.

 

8

 

DO NOT

 operate the tool

 when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

 

DO NOT

 get the tool

, battery or battery charger wet or use in damp or wet locations.

2.  INTRODUCTION

P

art of the SV10.8 Series offering a one battery fits all solution, keeping costs down without compromising on performance. Compact, 

lightweight cordless sander/polisher - body only. Comfortable housing with soft grip to help reduce vibration. Variable 6 speed control with 

no-load speeds ranging from 2500 to 5000rpm. Supplied with Backing pad. Suitable for hook and loop sanding and polishing pads. Requires 

compatible 10.8V 2Ah or 4Ah battery and mains charger, sold separately.

3.  SPECIFICATION

MODEL NO.: ...................................................

CP108VSPBO

B

attery: ...............

10.8V 2Ah - 4Ah Lithium-ion (not included)

N

o-Load Speeds:

 ..................................................

2500-5000

Pad Size: ...................................................................

150mm

N

oise Power/Pressure:

 ..................................

65.5/54.5dB(A)

A

ccessories (not included):

B

attery: .........................................................

CP108VBP 2Ah

B

attery: .........................................................

CP108VBP 4Ah

Mains charger:  ...................................................

CP108VMC

4.  OPERATION

NOTE: 

Battery state is indicated by the three LEDs on handle (fig.1).

NOTE: 

Test polisher, speed setting, polishing sponge/mop and medium 

being worked on a small, obscure area before applying to item be worked.

C

P108VSPBO   Issue 1     06/06/22

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

 Wear eye 

protection

 Wear protective 

gloves

 Wear ear 
protection

 

Wear safety 

footwear

 Wear protective 

clothing

 Wear a mask

O

n/Off Switch

Speed Control

Battery Indicator

Fig. 1

Reviews: