5. ASSEMBLY / STORAGE INSTRUCTIONS
5.1. ASSEMBLY.
The chain block is delivered assembled. Unpack the product and check contents against the parts list in these instructions. Should
there be any damaged or missing parts, contact your supplier immediately. It is recommended that two people lift the heavier models
from their boxes and hook them onto the support to be used.
5.2. STORAGE.
Store in a safe, dry, childproof location.
6. OWNER’S & OPERATOR’S RESPONSIBILITIES
The owner and/or operator shall study these instructions and retain them for future use.
6.1.
Understanding instructions and warnings.
The owner and/or operator shall understand the operating instructions and warnings before operating the chain block.
Warning information must be emphasised and understood.
If the operator is not fluent in English, the product instructions and warnings must be read to, and discussed with, the
operator in the operator’s native language by the owner, making sure the operator understands the contents.
6.2.
Damaged Chain blocks.
Any chain block which appears to be damaged, badly worn, or operates abnormally, MUST BE REMOVED FROM SERVICE!
It is recommended that necessary repairs be made by an authorised service agent.
6.3.
End of service.
Through years of normal wear, the chain block will eventually become unserviceable. When this happens ensure that it is disposed
of in accordance with local authority regulations.
PAGE 3
CB500.V3,1000.V3,2000.V3,3000.V3, 5000.V3 Issue: 2 - 09/10/17
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
