Original Language Version
5.3.
BATTERY TEST
5.3.1.
Select BATTERY TEST and press ENTER.
5.3.2.
Press the ◄ ► to select REGULAR/STD or START/STOP battery.
REGULAR/STD BATTERY:
FLOODED, AGM FLAT PLATE, AGM SPIRAL, VRLA/GEL
START/STOP BATTERY:
AGM FLAT PLATE, EFB
5.3.3.
Press the ◄ ► key to select the battery type.
5.3.4.
Press ENTER to confirm choice.
5.3.5.
Press the ◄ ► key to select the battery rating: CCA/SAE, EN, JIS, DIN, IEC &
CA/MCA.
5.3.6.
Press ENTER to confirm choice.
5.3.7.
Press the ◄ ► key to input the battery capacity.
CCA/SAE: 40~2000
EN: 40~1885
DIN: 25~1120
IEC: 30~1320
JIS: By battery type no.
CA/MCA 50~2400
5.3.8.
Press the ◄ ► to confirm the temperature.
5.3.9.
Press ENTER to begin the test.
RETURN FEATURE:
Before the test is started, the user can return to the previous setting page by pressing ENTER
for 2 seconds.
5.3.10. SURFACE CHARGE:
The battery will hold a surface charge if the engine has been running or after the battery has been charged. The tester may prompt you to
remove the surface charge.
A.
Follow the instructions indicating when to turn the headlights on and off or apply a load into the battery.
IN VEHICLE:
BATTERY TEST
XX.XX V
START/STOP
REGULAR/STD
BATTERY TYPE:
AGM FLAT PLATE
SELECT RATING:
CCA/SAE
SELECT CAPACITY:
560CCA/SAE
ABOVE 32°F/0°C?
YES/NO
SURFACE CHARGE
IN VEHICLE? YES
TURN HEADLIGHTS
ON FOR 15 SECS
© Jack Sealey Limited
BT2011 | Issue:1 02/03/20
