Sealey BT103 Instructions Manual Download Page 6

NOTE: 

It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT:

 No liability is accepted for incorrect use of this product.

WARRANTY:

 Guarantee is 12 months from purchase date, proof of which will be required for any claim.

5.4.4.4.   

Bad Cell, Replace see fig.15

The battery has a damaged cell or a short circuit, replace the battery, 

(Health=0, Voltage<12.4V, Electric Current=0A 0r 0CCA)

.

5.4.4.5.   

Charge, Retest see fig.16

The battery is unstable and needs to be recharged and retested to avoid error. If the same test result appears after recharging and 

retesting the battery is regarded as damaged and should be replaced, 

(Health<60%, Voltage<12.40V)

.

Note: 

If ‘REPLACE’ resulted from IN VEHICLE mode, it could be the case that the battery cables are not well connected. Retest    

the battery in OUT OF VEHICLE mode before making a decision about replacing the battery.

Note:

 After testing press scroll to return directly to the startup interface.

fig.15

fig.16

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be 

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

WEEE Regulations

Dispose of this product at the end of its working life in compliance with the EU Directive on 

Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed

of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Summary of Contents for BT103








Reviews: